Two 2-bit comparator circuits can be connected to form a single 4-bit comparator
- ATrue
- BFalse
With external logic two 2-bit comparators can be cascaded into a 4-bit comparator.
MCQs, short and long questions from lecture 12.Lecture 12 ki MCQs, short aur long sawal.
3 MCQs · 10 short · 1 long question · 3 MCQs from past papers3 MCQs · 10 short · 1 long sawal · 3 MCQs past papers se
Two 2-bit comparator circuits can be connected to form a single 4-bit comparator
With external logic two 2-bit comparators can be cascaded into a 4-bit comparator.
The output A < B is set to 1 when the input combination is __________
Only A=01 (1) and B=10 (2) has A less than B.
A comparator circuit has multiple inputs and ______ outputs
A magnitude comparator gives three outputs: A>B, A=B and A<B.
No MCQs match this filter.Is filter mein koi MCQ nahi.
For a two bit comparator circuit specify the inputs for which A > B.
Writing A1A0 B1B0: 01 00, 10 00, 10 01, 11 00, 11 01 and 11 10.
Write a note on the comparator.
A comparator compares two binary numbers A and B and activates one of three outputs: A>B, A=B or A<B. A 2-bit comparator has 4 inputs (A1A0, B1B0) and 3 outputs; for example A=B is 1 for 0000, 0101, 1010, 1111. Equality of each bit pair is detected with XNOR gates and the outputs are derived from a function table or K-maps. The 74x85 is a 4-bit magnitude comparator with cascading inputs for comparing longer numbers.
Why is a 2-bit comparator called a parallel comparator?
Because all bits of the two numbers are compared simultaneously rather than one bit at a time.
For a two bit comparator circuit specify the inputs for which the output A < B is set to 1.
Writing A1A0 B1B0: 00 01, 00 10, 00 11, 01 10, 01 11 and 10 11.
Two-bit iterative comparator circuit for comparison A=B. Explain functionality of the Circuit.
An iterative comparator compares the numbers one bit pair at a time using identical stages. Each stage receives an equality input Ein from the previous stage (the first stage gets Ein = 1) and produces Eout = Ein AND (Ai XNOR Bi). So a stage passes 1 only if all previous bits were equal and its own two bits are equal. For two bits, A = B output = (A1 XNOR B1)(A0 XNOR B0), which is 1 only when both bit pairs match. Because each stage only passes its result to the next, stages can be cascaded for longer numbers without extra logic.
What is comparator?
A comparator is a combinational circuit that compares two binary numbers A and B and shows their relation on outputs A > B, A = B and A < B. The basic one-bit comparator is an XOR (or XNOR) gate.
Two bit comparator? Explain by at least one example
A 2-bit comparator compares two 2-bit numbers A = A1A0 and B = B1B0 and has three outputs: A>B is set to 1 if A > B, A=B is set to 1 if A = B and A<B is set to 1 if A < B; only one output is 1 at a time. Example: A = 10 (2) and B = 01 (1) gives A>B = 1, A=B = 0, A<B = 0. A = 11 and B = 11 gives A=B = 1.
Comparator: all possibilities for A = B.
For a 2-bit comparator the A=B output is 1 for the input combinations A B = 00 00, 01 01, 10 10 and 11 11.
For a two bit comparator circuit, specify all the inputs for which A > B is set to 1.
With A = A1A0 and B = B1B0, A > B = 1 for: A=01,B=00; A=10,B=00; A=10,B=01; A=11,B=00; A=11,B=01; A=11,B=10 (six combinations). Expression: A>B = A1B1' + A0B1'B0' + A1A0B0'.
For a two bit comparator circuit, specify all the inputs for which the output A = B is set to 1.
A = B is 1 only when A1 = B1 and A0 = B0, i.e. for the four combinations A1A0 B1B0 = 00 00, 01 01, 10 10 and 11 11. Expression: (A=B) = (A1 XNOR B1)(A0 XNOR B0).
Draw the function table of the two-bit comparator circuit, map it to a K-map and derive the expression for (A > B).
A>B is 1 for A1A0B1B0 = 0100, 1000, 1001, 1100, 1101, 1110. From the K-map: A>B = A1 B1' + A0 B1' B0' + A1 A0 B0'.