The high density FLASH memory cell is implemented using ______________
A1 floating-gate MOS transistor
B2 floating-gate MOS transistors
C4 floating-gate MOS transistors
D6 floating-gate MOS transistors
A high-density flash cell is a single floating-gate MOS transistor.
No MCQs match this filter.Is filter mein koi MCQ nahi.
1.
★ Final term Spring 2010Lecture 422 marks
Explain the erase operation in context of Flash Memory.
Show answerJawab dekhein
Erasing removes the charge stored on the floating gates of a whole block (or the whole chip) at once. A high voltage is applied between the source and the control gate so that electrons tunnel off the floating gates; every erased cell then reads as 1. Cells must be erased before they can be programmed again.
2.
★ Final term Spring 2010Lecture 423 marks
Name three Operations that can be performed on FLASH Memory
Show answerJawab dekhein
The three operations of flash memory are programming (writing), reading, and erasing.
3.
★ Final term July 2012Lecture 423 marks
What are the three operations of FLASH MEMORY?
Show answerJawab dekhein
The three operations of flash memory are programming (writing), reading, and erasing.
No long questions added yet.Abhi koi long sawal shamil nahi.