Paper Tayyari

Final Term PreparationFinal term ki tayyari

Questions from past final papers.Pichhle final papers ke sawal.

169 MCQs · 92 short · 31 long questions · 169 MCQs from past papers169 MCQs · 92 short · 31 long sawal · 169 MCQs past papers se

Start mock testMock test shuru karein
DoneHal kiye 0/169
– correctsahi
1.
★ Final term Spring 2010Lecture 13

The departmental structures are different in banking and financial sector

  1. AFalse
  2. BTrue

The handout states that departmental structures are different in the banking and financial sector.

2.
★ Final term Spring 2010Lecture 19

Which of the following is the process or art of defining the hardware and software architecture, components, modules, interfaces, and data for a computer system to satisfy specified requirements?

  1. ASystems Design
  2. BSystems Requirement
  3. CCoding
  4. DRequirement

Systems design defines architecture, components, interfaces and data.

3.
★ Final term 2010Lecture 20

Which of the following increment in incremental model is usually the core product which addresses the basic requirements of the system ?

  1. AFirst
  2. BSecond
  3. CThird

The first increment is usually the core product meeting basic requirements.

4.
★ Final term Spring 2010Lecture 21

The spiral life cycle model is a combination of the classic water Fall model and aspects of risk analysis.

  1. ATrue
  2. BFalse

The spiral model combines the waterfall model with risk analysis.

5.
★ Final term Spring 2008Lecture 22

Computer programmers apply information technology to build information systems which solves these problems but need not fully understand the business usages they are computerizing or supporting.

  1. ATrue
  2. BFalse

Programmers build systems without necessarily understanding the business, which is why analysts are needed.

6.
★ Final term Spring 2008Lecture 24

If a flow chart become complex it is better to use connector symbols to reduce to number of flow lines.

  1. ATrue
  2. BFalse

Connector symbols reduce crossing and long flow lines in complex flowcharts.

7.
★ Final term Spring 2008Lecture 24

Arrow is also called __________

  1. ADotted line
  2. BProcess
  3. CFlow line

In flowcharts the arrow is the flow line showing the direction of flow.

8.
★ Final term Spring 2008Lecture 24

Rectangle shape in the flow charts represents___________

  1. ADecision
  2. BProcess
  3. CTerminator

A rectangle denotes a process or processing step in a flowchart.

9.
★ Final term Spring 2010Lecture 25

The purpose of data flow diagrams is to provide a --------- between users and systems developers

  1. ALinking bridge
  2. BEmpty space
  3. CData Flows
  4. DOptions a and b

DFDs act as a linking bridge between users and system developers.

10.
★ Final term Spring 2010Lecture 26

__________ is an association among entities. There has to be a relationship between two entities

  1. AValue Sets
  2. BCardinality
  3. CRelationships

A relationship is an association among entities in an ERD.

11.
★ Final term Spring 2010Lecture 26

__________ is an object that exists and is distinguishable from other objects.

  1. AValue Sets
  2. BEntity
  3. CRelationships

An entity is an object that exists and can be distinguished from others.

12.
★ Final term 2010Lecture 26

Which of the following is a data model or diagram for high-level descriptions of conceptual data model.

  1. AERD
  2. BFlow Chart
  3. CAlgorithm
  4. DDFD

An ERD gives a high-level graphical description of a conceptual data model.

13.
★ Final term Spring 2008Lecture 26

Which of the following is an object that exists and is distinguishable from other objects?

  1. AEntity
  2. BAttribute
  3. CObject
  4. DInstance

An entity is an object that exists and is distinguishable from others.

14.
★ Final term Spring 2010Lecture 27

The purpose of a class is to specify a classification of objects and to specify the features that characterize the structure and behavior of those objects.

  1. ATrue
  2. BFalse

A class classifies objects and specifies the features of their structure and behavior.

15.
★ Final term Spring 2010Lecture 27

Testing is easy for the software that is developed using OOAD due to use of ___________

  1. AModular approach
  2. BReal time modeling
  3. CUsability feature

OOAD builds software in modules, which makes testing easier.

16.
★ Final term Spring 2010Lecture 27

Which of the following is the characteristic of being able to assign a different meaning or usage to something in different contexts - specifically?

  1. AOOP
  2. BPolymorphism
  3. CEncapsulation
  4. DInheritance

Polymorphism assigns different meanings or uses to the same thing in different contexts.

17.
★ Final term Spring 2008Lecture 27

_______ usually identified by the phrase "is a kind of".

  1. AInheritance
  2. BClass
  3. CObject

Inheritance expresses an "is a kind of" relationship between classes.

18.
★ Final term Spring 2008Lecture 27

Characteristics of object are called ________

  1. AMethods
  2. BAttributes
  3. CStatus

Attributes are the characteristics of an object, while methods are its operations.

19.
★ Final term Spring 2008Lecture 27

Operations are usually called via _______

  1. AFunctions
  2. BSignatures
  3. CMethods

An operation can be called only through its valid operation signature.

20.
★ Final term Spring 2010Lecture 27

According to "Booch", object has following three components

  1. AState, Behavior, Identity
  2. BState, Behavior, Interface
  3. CState, Interface, methods
  4. DState, Variables, Methods

Booch defines an object as having state, behavior and identity.

21.
★ Final term Spring 2010Lecture 27

The interface is implemented by _______

  1. AMethods
  2. BSignatures
  3. CClasses
  4. DObjects

An interface only declares operations; classes provide their implementation.

22.
★ Final term Spring 2010Lecture 27

Which of the following carries connotations of the class to which the object belonged?

  1. AClass
  2. BInstance
  3. CStructure
  4. DNone of the above

The term instance implies the class to which the object belongs.

23.
★ Final term Spring 2010Lecture 27

Object oriented analysis focuses on the _________

  1. AStates of objects
  2. BCollaboration of objects
  3. CImplementation of objects

OOA defines classes and how they collaborate to meet the customer requirements.

24.
★ Final term Spring 2010Lecture 27

Object oriented analysis generates _________

  1. AImplementation constraints
  2. BSystem Interfaces
  3. CConceptual model of Information

OOA produces a conceptual model of the information in the problem domain.

25.
★ Final term Spring 2010Lecture 27

Which of the following is not considered during OO Design?

  1. AConcurrency factor
  2. BUsability factor
  3. CDistribution factor

OO design considers concurrency (task structure) and distribution (hardware), not usability.

26.
★ Final term 2010Lecture 27

Both software objects and real time objects have__________

  1. AIdentity and behavior
  2. BIdentity and state
  3. CState and behavior

Software objects are modelled on real-world objects, both having state and behaviour.

27.
★ Final term 2010Lecture 27

Which of the following carry characteristics of specialization?

  1. ASub classes
  2. BSub Interfaces
  3. CSub objects

Sub-classes specialize the more general super-class.

28.
★ Final term 2010Lecture 27

Object oriented analysis focuses on _________

  1. AModular approach
  2. BIncremental approach
  3. CTraditional approach
  4. DDerived approach

Object orientation takes a modular approach to building software.

29.
★ Final term Spring 2010Lecture 27

_________ means information hiding.

  1. AInheritance
  2. BEncapsulation
  3. CClass

Encapsulation hides an object's internal details.

30.
★ Final term Spring 2010Lecture 27

Object oriented design elaborates the hardware and software architecture to produce_________

  1. AImplementation specifications
  2. BTesting specifications
  3. CFunctional specifications
  4. DModelling specifications

OOD elaborates the analysis models into implementation specifications.

31.
★ Final term Spring 2008Lecture 28

Temporal CSFs in an organization, results from _________

  1. AEconomic changes
  2. BTechnological changes
  3. CInternal needs and changes
  4. DEnvironmental changes

Temporal CSFs arise from internal organizational needs and changes.

32.
★ Final term Spring 2010Lecture 28

Which of the following is not the type of CSF?

  1. AIndustry CSFs
  2. BEnvironmental CSFs
  3. CTechnical CSFs
  4. DTemporal CSFs

CSF types are industry, environmental and temporal; technical is not one.

33.
★ Final term Spring 2010Lecture 30

The out put of Threat Identification phase is a threat statement identifying and defining threats.

  1. ATrue
  2. BFalse

Threat identification produces a threat statement listing and defining the threats.

34.
★ Final term Spring 2008Lecture 32

Wireless computing devices are not subject to viruses.

  1. ATrue
  2. BFalse

Wireless computing devices are listed as a source of computer viruses.

35.
★ Final term Spring 2010Lecture 32

__________ installs a virus on the PC while performing another function.

  1. AOverwriting Viruses
  2. BBoot sector Virus
  3. CDropper

A dropper is a program that installs a virus while appearing to perform another function.

36.
★ Final term Spring 2010Lecture 32

__________ overwrites every program/software/file it infects with itself. Hence the infected file no longer functions.

  1. ADropper
  2. BOverwriting Viruses
  3. CBoot sector Virus

An overwriting virus replaces the infected file's contents with itself, so the file stops working.

37.
★ Final term Spring 2010Lecture 32

A dropper is a program not a virus.

  1. ATrue
  2. BFalse

A dropper is a program that installs a virus while doing another function; it is not a virus itself.

38.
★ Final term Spring 2010Lecture 32

_________ is a malicious program that is disguised as or embedded within legitimate software.

  1. ATrojan horse
  2. BDropper
  3. COverwriting Viruses

A Trojan horse hides inside or poses as legitimate software.

39.
★ Final term Spring 2010Lecture 33

Active Monitor software serves the concurrent monitoring as the system is being used.

  1. ATrue
  2. BFalse

Active monitors watch the system continuously while it is in use.

40.
★ Final term Spring 2010Lecture 33

________ Focus on detecting potentially abnormal behavior in function of operating system or request made by application software

  1. ABehavior blockers
  2. BActive monitors
  3. CScanners

Behavior blockers detect abnormal behavior in operating system functions or application requests.

41.
★ Final term Spring 2010Lecture 33

Which of the following scans the operating system and application software for any virus based on the viruses they contain.

  1. AAntivirus
  2. BScanners
  3. CActive Monitors
  4. DFirewall

Scanners check the OS and application software against the virus signatures they hold.

42.
★ Final term Spring 2010Lecture 34

Input controls monitor the initial handshaking procedure of the user with the operating system.

  1. ATrue
  2. BFalse

It is access controls, not input controls, that monitor the initial handshaking of the user with the operating system.

43.
★ Final term Spring 2010Lecture 35

Audit Trials can be used together with controls trials to identify and provide information about users suspected of improper modification of data.

  1. ATrue
  2. BFalse

Audit trails used with access controls help identify users suspected of improper data modification.

44.
★ Final term Spring 2008Lecture 35

Which of the following is a logical record of computer activities, usage, processing pertaining to an operating or application system or user activities?

  1. AAudit trail
  2. BControl Log
  3. CControl trial

An audit trail logically records computer activities and usage of systems and users.

45.
★ Final term Spring 2008Lecture 35

An event-oriented log usually contain records describing system events, application events, or user events.

  1. ATrue
  2. BFalse

An event-oriented log records system, application and user events.

46.
★ Final term Spring 2008Lecture 35

Web Site monitoring is the process used to view or record both the keystrokes entered by a computer user and the computer's response during an interactive session.

  1. ATrue
  2. BFalse

This describes keystroke monitoring, not web site monitoring.

47.
★ Final term Spring 2010Lecture 35

There are typically ________________ kinds of audit records

  1. AOne
  2. BTwo
  3. CThree
  4. DFour

The two kinds are an event-oriented log and a record of every keystroke.

48.
★ Final term Spring 2010Lecture 35

Control Trial can be used together with access controls to identify and provide information about users suspected of improper modification of data.

  1. ATrue
  2. BFalse

It is audit trails, not "control trial", that are used with access controls for this purpose.

49.
★ Final term Spring 2008Lecture 35

Which of the following usually contain records describing system events, application events, or user events?

  1. AAn event-oriented log
  2. BA record of every keystroke
  3. COption a and b
  4. DNone of these

An event-oriented log records system, application and user events.

50.
★ Final term Spring 2008Lecture 36

Which of the following is not considered Risk Management?

  1. AOn a daily basis, a manager analyses a situation and decides what actions should be taken, if any, given the uncertainties being faced.
  2. BRisk Management addresses actions to resolve a program's problems.
  3. CA systematic approach to setting the best course of action by identifying and acting on risk issues
  4. DAn RBM tool that helps to address potential problems that could interfere with the achievement of results.

Risk management deals with potential future problems under uncertainty, not with resolving problems that already exist.

51.
★ Final term Spring 2008Lecture 36

The objective of the entire risk management process is that no one should hamper the working of the smooth working of IS.

  1. ATrue
  2. BFalse

Risk management aims to ensure nothing hampers the smooth working of the information system.

52.
★ Final term Spring 2010Lecture 36

The identification of risks should start with:

  1. ADescription of the internal and external risks
  2. BA brainstorming session with risk management experts and a program profile
  3. CA good understanding of the program and a brainstorming session with key stakeholders
  4. DDefinitions of likelihood and impact

Risk identification starts from understanding the program and brainstorming with key stakeholders.

53.
★ Final term Spring 2010Lecture 36

A _______________ is the possibility of a problem, whereas a problem is a risk that has already occured.

  1. ARisk
  2. BThreat
  3. CIntrusion

A risk is a potential problem; once it happens it becomes a problem.

54.
★ Final term 2010Lecture 36

A risk is the possibility of a problem, whereas a problem is a risk that has already occurred.

  1. ATrue
  2. BFalse

A risk is a potential problem; once it happens it becomes a problem.

55.
★ Final term Spring 2010Lecture 37

Which of the following includes assessment of controls already been implemented or planned, probability that they can be broken, assessment of potential loss despite such controls existing?

  1. AControl Analysis
  2. BVulnerability Assessment
  3. CRisk Management
  4. DAll of above

Control analysis assesses existing/planned controls, their chance of being broken and residual loss.

56.
★ Final term Spring 2008Lecture 37

Risk Management includes assessment of controls already been implemented or planned, probability that they can be broken, assessment of potential loss despite such controls existing.

  1. ATrue
  2. BFalse

Control analysis, a phase of risk management, assesses existing and planned controls.

57.
★ Final term Spring 2008Lecture 38

If an organization can tolerate some downtime, cold sites backup might be appropriate.

  1. ATrue
  2. BFalse

A cold site takes time to set up, so it suits organizations that can tolerate some downtime.

58.
★ Final term 2010Lecture 38

Which of the following is a methodology used to create a plan for how an organization will resume partially or completely interrupted critical functions within a predetermined time after a disaster or disruption?

  1. AAudit Logs
  2. BDisaster Plan
  3. CAudit Trials
  4. DBusiness continuity Plan

BCP plans how critical functions are resumed within a set time after a disruption.

59.
★ Final term Spring 2010Lecture 39

The major purpose of enhancing web security is to protect web server from attacks through the use of internet.

  1. ATrue
  2. BFalse

Web security mainly aims to protect the web server from attacks coming through the internet.

60.
★ Final term Spring 2010Lecture 39

Passive Attack is one of the types of Web Security Threats

  1. ATrue
  2. BFalse

Web security threats are classified as passive and active attacks.

61.
★ Final term Spring 2008Lecture 39

Active Attack is one of the types of Web Security information systems.

  1. ATrue
  2. BFalse

Passive and active attacks are the two major classes of web security threats.

62.
★ Final term Spring 2010Lecture 39

Active Attack is one of the types of Web Security Threats.

  1. ATrue
  2. BFalse

Passive and active attacks are the two major classes of web security threats.

63.
★ Final term Spring 2008Lecture 41

Business-to-business EC (B2B) is one of the types of E-Commerce.

  1. ATrue
  2. BFalse

B2B, where businesses trade with each other over networks, is a basic e-commerce model.

64.
★ Final term Spring 2008Lecture 41

Collaborative commerce is one of the types of B2B.

  1. ATrue
  2. BFalse

Collaborative commerce, where partners collaborate on design and planning, is a type of B2B e-commerce.

65.
★ Final term Spring 2010Lecture 41

In which of the following there is a direct interaction facilitated by auctions, classifieds, and bartering?

  1. AEGovernment
  2. BMCommerce
  3. CConsumer-to-consumer EC
  4. DIntrabusiness EC

In C2C e-commerce consumers deal directly through auctions, classifieds and bartering.

66.
★ Final term Spring 2010Lecture 41

“M-Commerce” stands for Mobile Commerce.

  1. ATrue
  2. BFalse

M-commerce is e-commerce carried out through mobile/wireless devices.

67.
★ Final term 2010Lecture 41

M-Commerce (mobile commerce) refers to the conduct of e-commerce via wireless devices.

  1. ATrue
  2. BFalse

M-commerce is e-commerce conducted through wireless devices.

68.
★ Final term 2010Lecture 41

Buying and selling of products, services and information via computer networks, primarily through Internet is:

  1. AE-Commerce
  2. BE-Business
  3. CWeb Surfing
  4. DBPR

E-commerce is buying, selling and exchanging products, services and information over networks.

69.
★ Final term Spring 2008Lecture 41

What are the steps and their order in EC order fulfillment?

  1. AEnsuring payment, checking availability, arranging shipment, insurance, production, purchasing & warehousing, contacts with customers and returns
  2. BEnsuring payment, checking availability, arranging shipment, insurance, production, purchasing & warehousing, and contacts with customers
  3. CEnsuring payment, checking availability, arranging shipment, insurance, production, plant services, purchasing & warehousing, and contacts with customers
  4. DEnsuring payment, checking availability, arranging shipment, insurance, production, plant services, purchasing & warehousing, contacts with customers and returns

The nine-step EC order fulfillment process includes plant services and ends with returns.

70.
★ Final term Spring 2010Lecture 42

The bullwhip effect refers to erratic shifts in orders up and down the supply chain because of poor demand forecasting, price fluctuation, order batching, and rationing within the chain.

  1. ATrue
  2. BFalse

The bullwhip effect is order distortion along the supply chain caused by poor forecasting, price changes, batching and rationing.

71.
★ Final term Spring 2010Lecture 43

ERP or enterprise systems control all major business processes with a single software architecture in real time.

  1. AFalse
  2. BTrue

ERP systems integrate and control all major business processes on one software architecture in real time.

72.
★ Final term Spring 2008Lecture 43

ERP's major objective is to tightly integrate the functional areas of the organization and to enable seamless information flows across the functional areas.

  1. ATrue
  2. BFalse

Integrating all functional areas with seamless information flow is the main aim of ERP.

73.
★ Final term Spring 2008Lecture 43

ERP Systems control all major business processes with a single software architecture in real time.

  1. ATrue
  2. BFalse

ERP controls all major business processes through one software architecture in real time.

74.
★ Final term 2010Lecture 43

Leading ERP software vendors include SAP (SAP R/3), Oracle and PeopleSoft.

  1. ATrue
  2. BFalse

SAP, Oracle and PeopleSoft are leading ERP vendors.

75.
★ Final term Spring 2008Lecture 43

Benefits to ERP systems are that they can be extremely complex, expensive and time-consuming to implement.

  1. ATrue
  2. BFalse

Complexity, cost and long implementation are drawbacks, not benefits, of ERP.

76.
★ Final term Spring 2010Lecture 44

Preparing a situation for change by disconfirming existing attitudes and behaviors is called Unfreezing.

  1. ATrue
  2. BFalse

Unfreezing prepares for change by disconfirming existing attitudes and behaviors.

77.
★ Final term Spring 2008Lecture 44

Organizational Development is one of the types of Change.

  1. ATrue
  2. BFalse

Organizational development and reengineering are the two types of change.

78.
★ Final term Spring 2010Lecture 44

Maintaining and eventually institutionalizing the change is called Unfreezing.

  1. ATrue
  2. BFalse

Maintaining and institutionalizing change is refreezing, not unfreezing.

79.
★ Final term Spring 2010Lecture 45

Ethics is a branch of philosophy that deals with what is considered to be right and wrong.

  1. ATrue
  2. BFalse

Ethics is the branch of philosophy concerned with right and wrong conduct.

80.
★ Final term Spring 2008Lecture 45

Ethical issues may be categorized into which of the following types?

  1. APrivacy
  2. BAccuracy
  3. CProperty
  4. DAll of above

Ethical issues include privacy, accuracy, property and accessibility issues.

81.
★ Final term Spring 2010

Medium Sized organizations are normally a family ownership run by

  1. AFather & Sons
  2. BBrothers
  3. CFather, Sons and Brothers
  4. DNone of the given

Medium-sized organizations are usually family-owned and run by fathers, sons and brothers.

82.
★ Final term Spring 2010

Which of the following works in conjunction with routers and firewalls by monitoring network usage anomalies to protect a company’s information systems resources from external as well as internal misuse?

  1. AEncryption
  2. BIntrusion Detection Systems
  3. CFirewall
  4. DAll of above

An IDS works with routers and firewalls to detect anomalies in network usage.

83.
★ Final term Spring 2010

The Internet Protocol is designed solely for the addressing and routing of data packets across a network

  1. ATrue
  2. BFalse

IP only addresses and routes packets; delivery reliability is left to other protocols.

84.
★ Final term Spring 2010

MKIS helps organizations in efficient channel management

  1. ATrue
  2. BFalse

A marketing information system supports efficient management of distribution channels.

85.
★ Final term Spring 2010

Crypto Analysis is the science and art of transforming messages to make them secure and immune to attacks.

  1. ATrue
  2. BFalse

Transforming messages to make them secure is cryptography; cryptanalysis is breaking codes.

86.
★ Final term Spring 2010

In drawing a proper flowchart, all necessary steps that are a part of process should be listed out in ---------------------- order.

  1. ALogical
  2. BPhysical
  3. CRandom
  4. DTop to Bottom

Flowchart steps must be listed in logical order.

87.
★ Final term Spring 2010

Production subsystem needs to be linked with the marketing system to produce right amount of product.

  1. ATrue
  2. BFalse

Production must be linked with marketing so the right amount of product is made.

88.
★ Final term Spring 2010

DSS can be used to simulate the consequences of each alternative generated.

  1. ATRUE
  2. BFALSE

DSS models can simulate the outcome of each alternative.

89.
★ Final term Spring 2010

Which of the following select chief executive?

  1. AEmployees
  2. BCustomers
  3. CBoard of Directors

The board of directors selects the chief executive.

90.
★ Final term Spring 2010

A schematic representation of a sequence of operations as in a manufacturing process or computer program is called __________

  1. AAlgorithm.
  2. BEntity Relationship Diagram
  3. CFlowchart

A flowchart is a schematic diagram of a sequence of operations.

91.
★ Final term Spring 2010

Threat source motivation is an output for Likelihood determination

  1. ATrue
  2. BFalse

Threat-source motivation is an input to likelihood determination, not an output.

92.
★ Final term Spring 2010

Administrative Consol is one of the components of Intrusion Detection System (IDS).

  1. ATrue
  2. BFalse

An IDS includes sensors, analyzers and an administrative console.

93.
★ Final term Spring 2010

Availability of which of the following to various users also depends on how the information is processed?

  1. AInformation
  2. BData
  3. CLog File
  4. DNone of the above

How information is processed affects its availability to different users.

94.
★ Final term Spring 2010

_______ is the science of coded writing.

  1. ADecryption
  2. BCryptography
  3. CEncryption

Cryptography is the science of coded (secret) writing.

95.
★ Final term Spring 2008

Factors of which of the following are basic elements of reducing manufacturing cost?

  1. ACost
  2. BProduction
  3. CQuality
  4. DBrand

Factors of production (materials, labour, overheads) are the basic elements to control in reducing manufacturing cost.

96.
★ Final term Spring 2008

Past court decisions have stated that privacy must be balanced against the needs of society.

  1. ATrue
  2. BFalse

The handouts state that the right of privacy must be balanced against the needs of society.

97.
★ Final term Spring 2008

Which of the following is a weakness that can be accidentally triggered or intentionally exploited?

  1. AVulnerability
  2. BThreat Identification
  3. CAudit Trial
  4. DLikelihood Identification

A vulnerability is a flaw or weakness that a threat source can trigger or exploit.

98.
★ Final term Spring 2008

Which of the following may include program code of application softwares, technical manuals, user manuals etc?

  1. ADocumentation
  2. BAudit Trial
  3. CControl Trial
  4. DNone of these

System documentation covers program code, technical manuals and user manuals.

99.
★ Final term Spring 2008

Documentation may include program code of application softwares, technical manuals, user manuals etc.

  1. ATrue
  2. BFalse

Documentation includes program code, technical and user manuals and other system-related documents.

100.
★ Final term Spring 2008

Which of the following is some action or event that can lead to a loss?

  1. AThreat
  2. BDamage
  3. CAccident
  4. DNone of above

A threat is defined as an action or event that can lead to a loss.

101.
★ Final term Spring 2008

Feed back is the integral part of the _______

  1. AOpen system
  2. BClose System
  3. CClosed Loop System

In a closed loop system part of the output is fed back to control the system.

102.
★ Final term Spring 2008

__________ is a person who attempts to invade the privacy of the system.

  1. AHacktivsts
  2. BHackers
  3. CCrackers

A hacker tries to invade a system by getting around its access controls.

103.
★ Final term Spring 2008

BPR's major objective is to tightly integrate the functional areas of the organization and to enable seamless information flows across the functional areas.

  1. ATrue
  2. BFalse

Tight integration of functional areas is the objective of ERP, while BPR is about redesigning business processes.

104.
★ Final term Spring 2008

Cryptography primarily consists of two basic processes.

  1. ATrue
  2. BFalse

Cryptography consists of encryption and decryption.

105.
★ Final term Spring 2008

Logical intrusion skills needed to exploit logical exposures are more technical and complex as compared to physical exposures.

  1. ATrue
  2. BFalse

Exploiting logical exposures (hacking) needs more technical skill than physical exposures.

106.
★ Final term Spring 2008

Firewall is the primary method for keeping a computer secure from intruders.

  1. ATrue
  2. BFalse

A firewall is the primary method of keeping a computer secure from intruders.

107.
★ Final term Spring 2008

Where problem is recurring and repetitive, the common factors can be identified in order to identify a particular course of action is called --------------------------

  1. AStructured decisions
  2. BUnstructured decisions
  3. CSemi-Structured decisions

Structured decisions deal with recurring, repetitive problems with known common factors.

108.
★ Final term Spring 2008

The use of software routines to tie up the computer hosting a Web site that denies legitimate visitor's access is called:

  1. Adenial of service.
  2. Bhacking.
  3. Cspoofing
  4. Dsniffing

A denial-of-service attack ties up a host so legitimate users cannot use the service.

109.
★ Final term Spring 2008

A security program is a series of ongoing regular periodic reviews conducted to ensure that assets associated with the information systems function are safeguarded adequately.

  1. ATrue
  2. BFalse

The handout defines a security program as ongoing periodic reviews to ensure IS assets are safeguarded.

110.
★ Final term Spring 2008

The Internet's technological success does not depend on its principal communication tools, the Transmission Control Protocol (TCP) and the Internet Protocol (IP).

  1. ATrue
  2. BFalse

The Internet's success depends on its principal protocols TCP and IP.

111.
★ Final term Spring 2008

Which of the following helps an organization in gaining competitive advantage in the use of processes, effectiveness and efficiency should also be kept in mind?

  1. ABPR
  2. BCSF
  3. CSPR

Business process reengineering redesigns processes to gain competitive advantage while keeping effectiveness and efficiency in mind.

112.
★ Final term Spring 2010

Information technology is being used to overcome the business issues like, Marketing, Brand of the product, Quality of the product, Cost control, Organizational internal and external issues.

  1. AFalse
  2. BTrue

IT is used to address business issues such as marketing, branding, quality and cost control.

113.
★ Final term Spring 2010

The components of open loop system do not include control and feedback mechanism.

  1. ATrue
  2. BFalse

An open loop system has no internal objectives, so it has no control or feedback mechanism.

114.
★ Final term Spring 2010

One of the methods of integrating different business information systems is :

  1. ASupply Chain management software
  2. BInterface reconciliation software
  3. CMessage passing
  4. DNone of the given options

Systems can be integrated by connecting existing modules, or by using SCM or ERP software.

115.
★ Final term Spring 2010

Which of the following refers to the process of identifying attempts to penetrate a system and gain unauthorized access?

  1. AIntrusion detection
  2. BAudit Trial
  3. CControl Trial
  4. DDocumentation

Intrusion detection identifies attempts to penetrate a system and gain unauthorized access.

116.
★ Final term Spring 2010

Which one of the following computer systems uses duplication of components and data to cope with systems failures?

  1. AFault-tolerant systems
  2. BExpert System
  3. CMIS
  4. DOIS

Fault-tolerant systems duplicate components and data so they keep working when parts fail.

117.
★ Final term Spring 2010

Data travels across the internet through several levels of networks until it reaches its middle point.

  1. ATrue
  2. BFalse

Data travels through several levels of networks until it reaches its destination, not a middle point.

118.
★ Final term Spring 2010

A well designed system also helps in early detection of problems in critical areas.

  1. ATrue
  2. BFalse

A well designed system helps detect problems in critical areas early.

119.
★ Final term Spring 2010

The flowchart helps in locating and correcting errors also called debugging.

  1. ATrue
  2. BFalse

A flowchart aids debugging by helping locate and correct errors.

120.
★ Final term Spring 2010

Which of the following refers to the requirement that information should be protected from improper modification?

  1. AData Integrity
  2. BValidity
  3. CAuthenticity
  4. DNone of All

Integrity means protecting information from improper modification.

121.
★ Final term Spring 2010

Which of the following need to be ranked first on the basis of their probability of occurrence?

  1. AThreat
  2. BDamage
  3. CAccident
  4. DAll of the above

Identified threats are ranked by their probability of occurrence.

122.
★ Final term Spring 2010

Information technology can lead to a decrease in the time for decision making.

  1. ATrue
  2. BFalse

IT speeds up gathering and processing of information, so decisions can be made faster.

123.
★ Final term Spring 2010

Customer touch point is a method of interaction with a customer, such as telephone, e-mail, a customer service or help desk, conventional mail, Web site and store.

  1. ATrue
  2. BFalse

Any channel through which the business interacts with a customer is a touch point.

124.
★ Final term Spring 2010

MIS and DSS can be seen as having a systematic approach towards problem solution.

  1. ATrue
  2. BFalse

Both MIS and DSS follow a structured, systematic approach to solving problems.

125.
★ Final term Spring 2010

An information technology (IT) audit is an Examination of the controls within an entity’s Information technology infrastructure.

  1. ATrue
  2. BFalse

An IT/IS audit examines the controls within an entity's IT infrastructure.

126.
★ Final term Spring 2010

Access Control refers to the process of identifying attempts to penetrate a system and gain unauthorized access

  1. ATrue
  2. BFalse

Identifying penetration attempts is intrusion detection, not access control.

127.
★ Final term Spring 2010

Which of the following activity consists of the discovery, modeling, specification and evaluation of requirements?

  1. ADevelopment
  2. BDesign
  3. CRequirement
  4. DImplementation

Discovering, modelling, specifying and evaluating requirements is the requirements (analysis) activity.

128.
★ Final term Spring 2010

Every decision we take in daily life requires some sort of data about the alternatives available.

  1. ATrue
  2. BFalse

The handout says decisions require information, not raw data, about the alternatives.

129.
★ Final term Spring 2010

________________helps organization in gaining competitive advantage in the use of processes, effectiveness and efficiency.

  1. ABPR
  2. BCSF
  3. CSPR
  4. DMIS

Business process reengineering redesigns processes to gain competitive advantage, effectiveness and efficiency.

130.
★ Final term Spring 2010

Small organizations usually have complex management structure.

  1. ATrue
  2. BFalse

Small organizations usually have a simple management structure.

131.
★ Final term Spring 2010

Which of the following functions provide such data as sales prospect and contact information, product information, product configurations and sales quotes?

  1. ASales force automation (SFA)
  2. BCRM
  3. CERP
  4. DMIS

SFA functions provide prospect, contact, product and quote data to sales staff.

132.
★ Final term Spring 2010

Closed system is dependent on the internal resources and data.

  1. ATrue
  2. BFalse

A closed system relies on internal resources and data rather than the external environment.

133.
★ Final term Spring 2010

Automated data are less susceptible to destruction and misuse than paper data.

  1. ATrue
  2. BFalse

Electronic data are more susceptible to destruction, fraud and misuse because they are concentrated and widely accessible.

134.
★ Final term Spring 2010

___________ is related to defining the information needs and how these will be obtained.

  1. AInfrastructure
  2. BArchitecture
  3. CSystem

Architecture defines the information needs and how they are met through application modules.

135.
★ Final term Spring 2010

Intrabusiness is same as intraorganizational Business.

  1. ATrue
  2. BFalse

Intrabusiness e-commerce is also called intraorganizational commerce.

136.
★ Final term Spring 2010

A denial-of-service attack floods a Web site with so many requests for services that it slows down or crashes.

  1. ATrue
  2. BFalse

A DoS attack overloads a server with requests so it slows or crashes.

137.
★ Final term Spring 2010

An IDS can help even if incorrectness or scope limitation in the manner threats are defined.

  1. ATrue
  2. BFalse

An IDS cannot compensate for incorrect or limited definitions of threats.

138.
★ Final term 2010

Processing instructions carried out by the operating system and application software should be monitored by implementation of controls.

  1. ATrue
  2. BFalse

Processing controls monitor instructions executed by the OS and application software.

139.
★ Final term 2010

Which of the following has collection of predefined procedures related to each other?

  1. AOrganization
  2. BSystem
  3. CFirm

A system is a collection of related predefined procedures working together toward a goal.

140.
★ Final term 2010

Individuals using their skills to forward a political agenda, possibly breaking the law in the process, but justifying their actions for political reasons are called ________

  1. AHacktivsts
  2. BCrackers
  3. CHackers

Hacktivists use hacking skills for political causes.

141.
★ Final term 2010

Audit Trial is a weakness that can be accidentally triggered or intentionally exploited.

  1. ATrue
  2. BFalse

A weakness that can be triggered or exploited is a vulnerability, not an audit trail.

142.
★ Final term 2010

One of the methods of integrating different business information systems is Supply Chain management software.

  1. ATrue
  2. BFalse

Systems can be integrated by connecting modules, using SCM software or using ERP software.

143.
★ Final term Spring 2008

After her third data processing clerk showed up at work with wrist braces, Ms. Jackson called a specialty firm to assess the design of their work environment. This firm specializes in _____:

  1. AVideo display terminals
  2. BErgonomics
  3. CLighting
  4. DFurniture layout

Ergonomics studies designing work environments to fit human capabilities and prevent strain injuries.

144.
★ Final term Spring 2008

Which of the following is the science and art of transforming messages to make them secure and immune to attacks?

  1. ACryptography
  2. BCrypto analysis
  3. CDecryption
  4. DAll of these

Cryptography transforms messages to make them secure and immune to attacks.

145.
★ Final term Spring 2008

Which of the following is the primary method for keeping a computer secure from intruders?

  1. AAnti virus
  2. BScanners
  3. CFirewall
  4. DPassword

A firewall is the primary method of keeping intruders out of a computer.

146.
★ Final term Spring 2008

In case of logical intrusion, the intruder might be trying to have an unauthorized access to the system.

  1. ATrue
  2. BFalse

Logical intrusion is an attempt to gain unauthorized access through software or networks.

147.
★ Final term Spring 2008

The main source of bugs in computer programs is the complexity of decision-making code.

  1. ATrue
  2. BFalse

Decision-making code creates many paths, which is the main source of bugs.

148.
★ Final term Spring 2008

The damage caused by the intrusion is referred as the:

  1. AThreats
  2. BDamages
  3. CPhysical Threats
  4. DLogical Threats

The harm resulting from an intrusion is called damage.

149.
★ Final term Spring 2008

The emerging class of applications focuses on personalized decision support

  1. ATRUE
  2. BFALSE

Emerging applications focus on personalized decision support, modeling and data warehousing.

150.
★ Final term Spring 2008

A Protocol is an agreed-upon set of conventions that defines the rules of communication.

  1. ATrue
  2. BFalse

A protocol is a set of agreed rules of communication.

151.
★ Final term Spring 2010

A ________ is an agreed-upon set of conventions that defines the rules of communication.

  1. AProtocol
  2. BInterconnection Medium
  3. CData Packet
  4. DMessage

A protocol is a set of agreed rules of communication.

152.
★ Final term Spring 2010

----------is a type of computer software that facilitates group decision-making within an organization

  1. AEMS
  2. BDSS
  3. CMIS

An electronic meeting system supports group decision-making.

153.
★ Final term Spring 2010

Existence of functional departments in each organization may vary with the nature of industry and the nature of products/services being offered.

  1. ATrue
  2. BFalse

Functional departments vary with the industry and products/services.

154.
★ Final term Spring 2010

In assessing risks for an IT system, _______________ is the first step.

  1. ATo define the scope of the effort.
  2. BVulnerability Assessment
  3. Cthreat identification

Risk assessment begins by defining the scope of the effort.

155.
★ Final term Spring 2010

Past court decisions have stated that privacy must be balanced against the needs of ethics.

  1. ATrue
  2. BFalse

Privacy is balanced against the needs of society, not ethics.

156.
★ Final term Spring 2010

____________ are the symbols indicates the flow of the procedure being explained.

  1. AEntity Relationship Diagram
  2. BDFD
  3. CFlowchart

Flowchart symbols (with arrows) show the flow of a procedure.

157.
★ Final term Spring 2010

To accept the potential risk and continue operating the IT system or to implement controls to lower the risk to an acceptable level is called as ---------------.

  1. ARisk Planning
  2. BRisk Assumption
  3. CRisk Limitation
  4. DNone of the above

Risk assumption accepts the risk or lowers it to an acceptable level.

158.
★ Final term Spring 2010

RAID models based on producing deliverables frequently/repetitively

  1. ATrue
  2. BFalse

Producing deliverables repeatedly describes iterative models, not RAID.

159.
★ Final term Spring 2010

Information technology can lead to decreased electronic supervision of employees.

  1. ATrue
  2. BFalse

IT increases the possibility of electronic supervision of employees.

160.
★ Final term Spring 2010

Which of the following Customer Relationship Management (CRM) is an enterprise wide effort to acquire and retain customers?

  1. AERP
  2. BCRM
  3. CMIS
  4. DESS

CRM is an enterprise-wide effort to acquire and retain customers.

161.
★ Final term Spring 2010

When the logic model approach is used for identifying risks, which assumptions must be considered as part of the risk identification process?

  1. AThe assumptions behind all elements of the logic model - the activities, outputs, and outcomes
  2. BThe assumptions behind the outcomes of the logic model
  3. CThe internal and external risks of the initiative
  4. DThe assumptions underlying the resources and reach of the logic model

Risks can arise from assumptions behind every element of the logic model, so all must be examined.

162.
★ Final term Spring 2010

Threat capacity is an input source for Likelihood determination.

  1. AFalse
  2. BTrue

Likelihood determination inputs include threat-source motivation and threat capacity.

163.
★ Final term Spring 2010

Entity represents sources of data received by the system or destinations of the data produced by the system.

  1. ATrue
  2. BFalse

In a DFD an external entity is a source or destination of data.

164.
★ Final term Spring 2010

Firewall Security Systems may be a solution to Internet connectivity.

  1. ATrue
  2. BFalse

Firewalls give secure access to the internet.

165.
★ Final term Spring 2010

An IDS with the neural network feature monitors the general patterns of activity and traffic on the network and creates a database.

  1. ATrue
  2. BFalse

A neural-network IDS learns general traffic patterns into a database.

166.
★ Final term Spring 2010

------------------ combines many human resource functions like benefits administration, payroll, recruiting and training etc.

  1. AHuman Resource Information System
  2. BAccount Information System
  3. CFinancial Information System

An HRIS combines HR functions such as payroll and recruiting in one package.

167.
★ Final term Spring 2010

The Internet Protocol is designed solely for the connecting and routing of data packets across an internet.

  1. ATrue
  2. BFalse

IP is designed for addressing and routing of packets, not connecting.

168.
★ Final term Spring 2010

Which of the following refers to the process of identifying attempts to penetrate a system and gain unauthorized access?

  1. AThreat Identification
  2. BIntrusion detection
  3. CAccess Control
  4. DAll of above

Intrusion detection identifies attempts to penetrate a system.

169.
★ Final term Spring 2010

_____________ is one of the component of Intrusion Detection System (IDS).

  1. ALog File
  2. BHost
  3. CAdministrative Console
  4. DNone of above

An administrative console is a component of an IDS.