Paper Tayyari

Midterm PreparationMidterm ki tayyari

Questions from past midterm papers.Pichhle midterm papers ke sawal.

79 MCQs · 79 MCQs from past papers79 MCQs · 79 MCQs past papers se

Start mock testMock test shuru karein
DoneHal kiye 0/79
– correctsahi
1.
★ Midterm Spring 2010

Effective network means that the network has fast delivery, timeliness and ______.

  1. Ahigh bandwidth
  2. Bduplex transmission
  3. Caccurate transmission
  4. Dlow bandwidth

Network effectiveness rests on delivery, accuracy and timeliness.

2.
★ Midterm Spring 2010

A set of devices connected by communication links is called networking.

  1. ATrue
  2. BFalse

A network is a set of devices (nodes) connected by communication links.

3.
★ Midterm Spring 2010

Which one best describes the given statement: "To allow multiple users to share total capacity of a transmission medium"?

  1. Acongestion control
  2. Bexchange management
  3. Cmultiplexing

Multiplexing lets several users share the capacity of one link.

4.
★ Midterm Spring 2010

Line configuration refers to the way two or more devices attach to a ______.

  1. ALink
  2. BCircuit
  3. CRoute
  4. DNode

Line configuration (point-to-point or multipoint) describes how devices attach to a link.

5.
★ Midterm Spring 2010

______ requires the maximum number of I/O ports.

  1. ABus
  2. BStar
  3. CMesh
  4. DRing

In a mesh every device needs n-1 I/O ports, one per other device.

6.
★ Midterm Spring 2010

______ is used to define the direction of the signal flow between the linked devices.

  1. Atransmission mode
  2. Btransmission method
  3. Ctransmission impairments

Transmission mode (simplex, half-duplex, full-duplex) defines direction of signal flow.

7.
★ Midterm Spring 2010

Unidirectional traffic movement is overcome by dual ring technology.

  1. ATrue
  2. BFalse

A second ring carrying traffic in the opposite direction removes the one-direction limitation of a ring.

8.
★ Midterm Spring 2010

Trailer is only added at ______ layer of OSI model.

  1. AData link
  2. BPhysical
  3. CNetwork
  4. DApplication

Only the data link layer usually adds a trailer (for error detection).

9.
★ Midterm Spring 2010

Data link layer deals with mechanical and electrical specifications of transmission medium and interface.

  1. ATrue
  2. BFalse

Mechanical and electrical specifications belong to the physical layer, not the data link layer.

10.
★ Midterm Spring 2010

A signal that repeats a pattern over a regular interval of time is called ______.

  1. Aperiodic signal
  2. Banalog signal
  3. Ccomposite signal

A periodic signal completes a pattern within a measurable time frame (period) and repeats it.

11.
★ Midterm Spring 2010

If there is ______ in voltage then the frequency is infinite.

  1. Ainstantaneous change
  2. Bcontinuous change
  3. Cno change

A change in zero time (instantaneous) means infinite frequency; no change means zero frequency.

12.
★ Midterm Spring 2010

In a time-domain plot, the horizontal axis is a measure of ______.

  1. Asignal amplitude
  2. Bfrequency
  3. Cphase
  4. Dtime

A time-domain plot shows amplitude (vertical) against time (horizontal).

13.
★ Midterm Spring 2010

DC component is also termed as direct current component or a component with non-zero frequency.

  1. AFalse
  2. BTrue

A DC component has zero frequency, so the statement is false.

14.
★ Midterm Spring 2010

Quantization means measuring amplitudes of signal at equal intervals.

  1. ATrue
  2. BFalse

Measuring amplitude at equal intervals is sampling; quantization assigns sampled values to fixed levels.

15.
★ Midterm Spring 2010

Amplitude in ASK is more resistive to EMI and noise.

  1. ATrue
  2. BFalse

Noise usually alters amplitude, so ASK is highly susceptible to EMI and noise.

16.
★ Midterm Spring 2010

ASK, PSK, FSK and QAM are examples of ______ modulation.

  1. Adigital-to-digital
  2. Bdigital-to-analog
  3. Canalog-to-analog
  4. Danalog-to-digital

These schemes change a carrier's properties to carry digital data, i.e. digital-to-analog conversion.

17.
★ Midterm Spring 2010

The bit rate always equals the baud rate in which type of signal?

  1. AFSK
  2. BQAM
  3. C4-PSK
  4. DPSK

In (binary) FSK each signal element carries one bit, so bit rate equals baud rate.

18.
★ Midterm Spring 2010

Asynchronous transmission is ______.

  1. Aslow
  2. Bcostly
  3. Cnon-effective
  4. Dfast

Start/stop bits and gaps add overhead, making asynchronous transmission slower than synchronous.

19.
★ Midterm Spring 2010

A ______ converts an analog signal into a digital signal.

  1. ADemodulator
  2. BModulator
  3. CDigital-to-analog converter

A demodulator recovers digital data from a modulated analog signal.

20.
★ Midterm Spring 2010

In a ring, if a station does not receive its signal up to a specified time, the system issues an alarm to ______.

  1. Aanother node
  2. Bnetwork manager
  3. Cswitch
  4. Dnetwork analyzer

The alarm alerts the network operator/manager to the problem and its location.

21.
★ Midterm Spring 2010

The information to be communicated in a data communications system is the ______.

  1. AMedium
  2. BProtocol
  3. CMessage
  4. DTransmission

The message is the data (information) being communicated.

22.
★ Midterm Spring 2010

Which is not an element of protocol?

  1. Asemantics
  2. Btiming
  3. Ccommunication service module

Protocol elements are syntax, semantics and timing.

23.
★ Midterm Spring 2010

Which topology requires a central controller or hub?

  1. AMesh
  2. BStar
  3. CBus
  4. DRing

In a star topology every device links to a central hub that controls traffic.

24.
★ Midterm Spring 2010

Layers 5, 6 and 7 are also called network support layers.

  1. ATrue
  2. BFalse

Layers 5-7 are user support layers; layers 1-3 are network support layers.

25.
★ Midterm Spring 2010

Internet with small "i" specifies the world wide network, the actual Internet.

  1. ATrue
  2. BFalse

A lowercase "internet" is any interconnection of networks; the capital "I" Internet is the worldwide one.

26.
★ Midterm Spring 2010

Data synchronization is a function related with ______.

  1. Asession layer
  2. Bpresentation layer
  3. Ctransport

The session layer inserts synchronization points (checkpoints) into the data stream.

27.
★ Midterm Spring 2010

OSI model was developed prior to TCP/IP model.

  1. ATrue
  2. BFalse

TCP/IP was developed before the OSI model was published.

28.
★ Midterm Spring 2010

Frequency band in which 99% of the total power resides is called ______.

  1. Apower bandwidth
  2. Bhalf power bandwidth
  3. C3dB bandwidth
  4. DF.M.

The band holding 99% of a signal's power is its power bandwidth.

29.
★ Midterm Spring 2010

In differential Manchester we require two transitions or signal changes to represent binary ______.

  1. Azero
  2. Bone
  3. Cboth zero and one

Bit 0 has a transition at the start and in the middle; bit 1 has only the middle transition.

30.
★ Midterm Spring 2010

In Alternate Mark Inversion the term mark comes from ______.

  1. Atelegraphy
  2. Btelephony
  3. Cdigital telephony

Mark (meaning 1) is a term from telegraphy.

31.
★ Midterm Spring 2010

A 56K modem can download at a rate of ______ Kbps and upload at a rate of ______ Kbps.

  1. A33.6; 33.6
  2. B33.6; 56.6
  3. C56.6; 33.6
  4. D56.6; 56.6

56K modems download at about 56 Kbps but upload only at 33.6 Kbps.

32.
★ Midterm Spring 2010

At the ______ layer, a DCE takes data generated by a DTE.

  1. Aphysical
  2. Btransport
  3. Cdata link
  4. Dapplication

The DCE converts the DTE's data into signals at the physical layer.

33.
★ Midterm Spring 2010

______ requires more bandwidth.

  1. AFSK
  2. BASK
  3. CPSK
  4. DQAM

FSK uses two carrier frequencies, so its bandwidth is baud rate plus the frequency shift, larger than ASK/PSK/QAM.

34.
★ Midterm Spring 2010

Which one is not among the standards creation committees?

  1. AInternet Society and IETF
  2. BITU-T
  3. CIEEE

ITU-T and IEEE are standards creation committees; ISOC/IETF are Internet standards bodies, listed separately.

35.
★ Midterm Spring 2010

Set of rules that govern communication is called ______.

  1. AOSI model
  2. BProtocol
  3. CTCP/IP model
  4. DDatagram

A protocol is a set of rules governing data communication.

36.
★ Midterm Spring 2010

Frequency of a failure and network recovery time after a failure are measures of the ______ of a network.

  1. APerformance
  2. BReliability
  3. CSecurity
  4. DFeasibility

Reliability is measured by failure frequency and recovery time after a failure.

37.
★ Midterm Spring 2010

3dB bandwidth is also called power bandwidth.

  1. ATrue
  2. BFalse

3dB bandwidth is the half-power bandwidth, not the (99%) power bandwidth.

38.
★ Midterm Spring 2010

Packet switching is a connection-oriented service.

  1. ATrue
  2. BFalse

Packet (datagram) switching is connectionless; each packet is routed independently.

39.
★ Midterm Spring 2010

The internet model consists of ______ layers.

  1. Athree
  2. Btwo
  3. Cfive
  4. Dseven

The Internet (TCP/IP) model has five layers: physical, data link, network, transport and application.

40.
★ Midterm Spring 2010

Analog-to-digital conversion is also termed as modulating an analog signal.

  1. ATrue
  2. BFalse

Analog-to-digital conversion is called digitizing an analog signal, not modulating it.

41.
★ Midterm Spring 2010

PCM is the first process of PAM.

  1. ATrue
  2. BFalse

It is the reverse: PAM is the first step of PCM.

42.
★ Midterm Spring 2010

A modulator converts a(n) ______ signal to a(n) ______ signal.

  1. AFSK; PSK
  2. BDigital; analog
  3. CAnalog; digital
  4. DPSK; FSK

A modulator turns digital data into an analog signal.

43.
★ Midterm Spring 2010

The ______ layer changes bits into electromagnetic signals.

  1. Aphysical
  2. Bdata link
  3. Ctransport
  4. Dnone of given

The physical layer converts bits into signals for the medium.

44.
★ Midterm Spring 2010

We need ______ to decompose a composite signal into its components.

  1. AFourier transform
  2. BNyquist theorem
  3. CShannon capacity

Fourier analysis breaks a composite signal into its sine-wave components.

45.
★ Midterm Spring 2010

There are ______ possible (popular) variations of 16-QAM.

  1. Afive
  2. Btwo
  3. Cthree
  4. Dfour

Three common 16-QAM constellations are described (e.g. 3 amplitudes/12 phases, 4/8, and 2/8 style).

46.
★ Midterm Spring 2010

Number of signal units per second that are required to represent a bit is called bit rate.

  1. ATrue
  2. BFalse

Signal units per second is the baud rate; bit rate is bits per second.

47.
★ Midterm Spring 2010

______ is a multipoint topology.

  1. ARing
  2. BMesh
  3. CTree
  4. DBus

A bus shares one backbone cable among all devices, a multipoint link.

48.
★ Midterm Spring 2010

As the data packet moves from the lower to the upper layers, headers are ______.

  1. Aadded
  2. Bsubtracted
  3. Crearranged
  4. Dmodified

Each receiving layer removes its peer's header as data moves up.

49.
★ Midterm Spring 2010

Data chunk at data link layer is called ______.

  1. Aframe
  2. Bpacket
  3. Cdatagram

The data link layer's data unit is a frame.

50.
★ Midterm Spring 2010

The ______ layer is the layer closest to the transmission medium.

  1. APhysical
  2. BData link
  3. CNetwork
  4. DTransport

The physical layer sits directly on the transmission medium.

51.
★ Midterm Spring 2010

Which layer is responsible for source-to-destination delivery of the entire message?

  1. Atransport layer
  2. Bnetwork layer
  3. Csession layer
  4. Dapplication layer

The transport layer delivers the whole message end to end; the network layer delivers individual packets.

52.
★ Midterm Spring 2010

Encryption and encoding are the same terms.

  1. ATrue
  2. BFalse

Encryption secures data; encoding converts data into a signal or format.

53.
★ Midterm Spring 2010

TCP/IP model application layer incorporates OSI application and presentation layers.

  1. ATrue
  2. BFalse

The TCP/IP application layer covers the OSI session, presentation and application layers.

54.
★ Midterm Spring 2010

A sine wave must be an analog signal.

  1. ATrue
  2. BFalse

A sine wave varies continuously, so it is an analog signal.

55.
★ Midterm Spring 2010

A periodic signal can always be decomposed into ______.

  1. Aexactly an odd number of sine waves
  2. Ba set of sine waves
  3. Ca set of sine waves, one of which must have a phase of 0
  4. Dnone of the given

By Fourier analysis any periodic signal is a sum of sine waves.

56.
★ Midterm Spring 2010

Manchester is a type of ______ encoding.

  1. Abiphase
  2. Bpolar
  3. Cbiphase & polar
  4. Dnone of the given

Manchester and differential Manchester are the biphase schemes.

57.
★ Midterm Spring 2010

Modulation of an analog signal can be accomplished through changing the ______ of the carrier signal.

  1. Aamplitude
  2. Bfrequency
  3. Cphase
  4. Dall of the given

AM, FM and PM change amplitude, frequency or phase of the carrier.

58.
★ Midterm Spring 2010

In ______ transmission, bits are transmitted over a single wire, one at a time.

  1. AAsynchronous serial
  2. BSynchronous serial
  3. CParallel
  4. DAsynchronous & Synchronous serial

Both forms of serial transmission send one bit at a time over one line.

59.
★ Midterm Spring 2010

In RS-422 balanced mode two lines carry ______ signals which are not identical to each other.

  1. Asame
  2. Bdifferent
  3. Cdigital
  4. Danalog

In balanced mode both lines carry the same signal, one being the complement of the other, so they are not identical.

60.
★ Midterm Spring 2009

The ______ generates the data and passes it along with any control information to a ______.

  1. ADTE; DCE
  2. BDCE; DTE
  3. CDCE; node
  4. DDTE; application

The DTE is the data source/sink and hands data to the DCE, which converts it for the network.

61.
★ Midterm Spring 2009

In ______ transmission, a start bit and a stop bit frame a character byte.

  1. AAsynchronous serial
  2. BSynchronous serial
  3. CParallel
  4. DAsynchronous & Synchronous serial

Asynchronous serial transmission frames each byte with start and stop bits.

62.
★ Midterm Spring 2009

In ______ transmission, bits are transmitted simultaneously, each across its own wire.

  1. AAsynchronous serial
  2. BSynchronous serial
  3. CParallel
  4. DAsynchronous & Synchronous serial

Parallel transmission sends n bits at once over n wires.

63.
★ Midterm Spring 2009

In ______ transmission the timing of the signal is unimportant.

  1. AAsynchronous
  2. BSynchronous
  3. CPolar
  4. DBi-polar

Asynchronous transmission resynchronizes on each start bit, so overall signal timing is unimportant.

64.
★ Midterm Spring 2009

In 8-QAM each signal shift or one baud represents ______.

  1. A4 bits
  2. B2 bits
  3. C5 bits
  4. D3 bits

8 signal states need log2(8) = 3 bits per baud.

65.
★ Midterm Spring 2009

Biphase encoding is a type of bipolar encoding in which we use two voltage levels.

  1. ATrue
  2. BFalse

Biphase (Manchester, differential Manchester) is a polar scheme; bipolar uses three levels (positive, zero, negative).

66.
★ Midterm Spring 2009

The amplitude of a digital signal depends upon the ______ to represent a bit.

  1. Aphase
  2. Bvoltage
  3. Cwavelength

A digital signal's amplitude is the voltage level used for a bit.

67.
★ Midterm Spring 2009

Time domain plot shows changes in signal phase with respect to time.

  1. ATrue
  2. BFalse

A time-domain plot shows amplitude against time, not phase.

68.
★ Midterm Spring 2009

______ representation of links that connect nodes is called as physical topology.

  1. Ageometrical
  2. Blogical
  3. Cphysical

Topology is the geometric representation of the links and nodes of a network.

69.
★ Midterm Spring 2009

In mesh topology, if there are five nodes then there will be ______ links.

  1. A5
  2. B10
  3. C15
  4. D20

A full mesh needs n(n-1)/2 = 5x4/2 = 10 links.

70.
★ Midterm Spring 2009

Non-proprietary standard is also termed as de facto standard.

  1. ATrue
  2. BFalse

De facto standards are divided into proprietary and non-proprietary ones, so a non-proprietary standard is a de facto standard.

71.
★ Midterm Spring 2009

Secondary hub in a tree must be a passive hub.

  1. ATrue
  2. BFalse

Secondary hubs in a tree can be active or passive.

72.
★ Midterm Spring 2009

When data are transmitted from device A to device B, the header from A's layer 4 is read by B's ______ layer.

  1. Aphysical
  2. Btransport
  3. Capplication
  4. Dnone of the given

Each layer's header is read by the peer layer; layer 4 is transport.

73.
★ Midterm Spring 2009

The inversion of the level at 1 bit is called as ______.

  1. ANRZ-L
  2. BNRZ-I
  3. CRZ

In NRZ-I the signal level inverts whenever a 1 bit occurs.

74.
★ Midterm Spring 2009

Biphase and bipolar are same terms.

  1. ATrue
  2. BFalse

Biphase is polar with mid-bit transitions; bipolar uses three levels with alternating 1s.

75.
★ Midterm Spring 2009

The last process in PCM is ______ digital data into digital signal.

  1. Aencoding
  2. Bdecoding
  3. Cmodulating

After PAM, quantization and binary encoding, PCM ends with line encoding of the digital data into a digital signal.

76.
★ Midterm Spring 2009

Which modulation technique involves tribits, eight different phase shifts, and one amplitude?

  1. AFSK
  2. B8-PSK
  3. CASK
  4. D4-PSK

8-PSK uses 8 phases at one amplitude, each carrying 3 bits (a tribit).

77.
★ Midterm Spring 2009

Synchronous transmission has ______.

  1. Aa start bit
  2. Ba stop bit
  3. Cgaps between bytes
  4. Dnone of the given

Synchronous transmission sends a continuous bit stream without start/stop bits or gaps.

78.
★ Midterm Spring 2009

A human brain is considered as a ______.

  1. Adriver
  2. Bmachine
  3. CDTE
  4. DDCE

A DTE is any source or sink of digital data, which can include a human brain.

79.
★ Midterm Spring 2009

The last modified version of EIA-232 standard is ______.

  1. AEIA-232-D
  2. BEIA-232-A
  3. CEIA-232-B
  4. DEIA-232-C

Among the given versions, EIA-232-D is the latest revision.