A Bridge can ---------------.
- AFilter a frame.
- BForward a frame.
- CExtend LAN.
- DAll of the given.
A bridge extends a LAN by connecting segments and filters or forwards each frame.
MCQs, short and long questions from lecture 14.Lecture 14 ki MCQs, short aur long sawal.
11 MCQs · 4 short · 2 long questions · 11 MCQs from past papers11 MCQs · 4 short · 2 long sawal · 11 MCQs past papers se
A Bridge can ---------------.
A bridge extends a LAN by connecting segments and filters or forwards each frame.
A Bridge forwards or filters a frame by comparing the information in its address table to the frame's__________
The forwarding decision is made by looking up the frame destination MAC (layer 2) address.
A system with redundant bridges might have a problem with_______ in the system.
Redundant bridges create cycles, so frames can loop endlessly unless a spanning tree is used.
A bridge uses the ___________ to determine which computers connect to which segment, and uses the __________ to determine whether to forward a copy of frame.
A bridge learns from source addresses and forwards based on destination addresses.
A system with redundant bridges might have a problem with_______ in the system.
Redundant bridges can create forwarding loops.
The most important task a bridge performs is _______
A bridge's key job is frame filtering: forwarding only frames that must cross segments.
A system with redundant bridges might have a problem with_______ in the system.
Redundant bridges can create forwarding loops, which the spanning tree algorithm prevents.
According to a bridge performance, if both the source and destination are on the same segment
A bridge filters frames whose source and destination are on the same segment.
If a bridge builds up address list for each segment that consists of physical addresses of the computer attached to that segment. So, when the bridge boots, the size of list will be__ for each segment .
A bridge starts with empty lists and learns addresses from traffic.
Frame forwarding of a bridge is based on _________.
A bridge forwards using the frame's layer 2 destination address.
According to a bridges Performance, if both the sauces and destination are on the same segment
A bridge filters frames whose source and destination are on the same segment.
No MCQs match this filter.Is filter mein koi MCQ nahi.
What is meant by Bridges STARTUP and STEADY State?
Startup state: when a bridge first starts its address table is empty, so it does not know where any computer is; it forwards every frame to all other segments while learning locations from the source addresses of frames it sees. Steady state: after computers have sent frames, the bridge knows which segment each computer is on, so it forwards a frame only when the destination is on a different segment and filters frames whose destination is on the same segment. This reduces traffic and lets each segment carry local traffic simultaneously.
define bridge
A bridge is a device that connects two LAN segments and forwards complete frames between them. It does not forward collisions or invalid frames, and it learns where computers are from source addresses so that it forwards a frame only when its destination is on the other segment (filtering otherwise). It is transparent to the computers and makes the segments act as one LAN.
Bridges STARTUP vs STEADY state
At startup a bridge's address table is empty, so it forwards frames to the other segment while it learns source addresses. In steady state it has learned where the computers are, so it forwards a frame only when the destination is on the other segment and filters all local traffic.
Is bridge is intelligent?
Yes. A bridge learns which computers are on each segment from the source addresses of frames, forwards a frame only when its destination is on another segment, filters local frames, and does not pass collisions or noise, unlike a simple repeater.
How can a bridge know whether to forward frames?
A bridge learns automatically. It runs in promiscuous mode and examines every frame on each attached segment. From the source address of each frame it learns which segment that computer is on and records it in its address table. For each frame it then looks up the destination address: if the destination is on the same segment the frame came from, the bridge filters (does not forward) it; if the destination is on another segment, it forwards the frame only to that segment; if the destination is unknown, or is a broadcast/multicast, it forwards the frame to all other segments. Entries are updated as new frames arrive.
Write note on Bridges
A bridge is a device that connects two (or more) LAN segments and passes frames between them, operating at the physical and data link layers. Unlike a repeater it handles complete frames: it does not forward collisions or damaged frames, so each segment is a separate collision domain. A bridge is adaptive (learning): it examines the source address of each frame to learn which segment each computer is on, then filters a frame whose destination is on the same segment and forwards it only when the destination is on another segment (unknown and broadcast frames go everywhere). This lets each segment carry local traffic at the same time and extends the LAN. Bridges are transparent to computers. When bridges form a loop, the distributed spanning tree algorithm is used to disable some links so that frames do not circulate forever.