Paper Tayyari

Midterm PreparationMidterm ki tayyari

Syllabus: lectures 1–22. Past-paper MCQs are shown first.Syllabus: lecture 1–22. Past paper ki MCQs pehle dikhai gayi hain.

293 MCQs · 17 short · 2 long questions · 44 MCQs from past papers293 MCQs · 17 short · 2 long sawal · 44 MCQs past papers se

Start mock testMock test shuru karein
DoneHal kiye 0/293
– correctsahi
1.
★ Midterm Spring 2012 (Virtualians)Lecture 1

The set {x : a ≤ x ≤ b} can be written in the form of interval

  1. A(a, b)
  2. B(a, b]
  3. C[a, b]

Both endpoints are included, giving the closed interval [a, b].Dono endpoints shamil hain, isliye closed interval [a, b].

2.
★ Midterm Spring 2012 (Virtualians)Lecture 2

The solution set of the inequality |x + 4| ≥ 2 is

  1. A(−∞, −6] ∪ [2, +∞)
  2. BNone of these
  3. C(−∞, 6] ∪ [−2, +∞)
  4. D(−∞, −6] ∪ [−2, +∞)

x + 4 ≥ 2 gives x ≥ −2 and x + 4 ≤ −2 gives x ≤ −6.x + 4 ≥ 2 se x ≥ −2, aur x + 4 ≤ −2 se x ≤ −6.

3.
★ Midterm Spring 2012 (Virtualians)Lecture 5

The graph of the equation y = x² − 4x + 5 will represent

  1. AParabola
  2. BStraight line
  3. CTwo straight lines
  4. DEllipse

A quadratic y = ax² + bx + c graphs as a parabola.Quadratic y = ax² + bx + c ka graph parabola hota hai.

4.
★ Midterm Fall 2008 (Virtualians)Lecture 10

lim_{x→5} √(x + 4)/(x² + 2) =

  1. A0
  2. B∞
  3. C1/9
  4. DLimit doesn't exist

Direct substitution gives √9/27 = 3/27 = 1/9.Seedha x = 5 rakhne se √9/27 = 3/27 = 1/9.

5.
★ Midterm Spring 2012 (Virtualians)Lecture 10

lim(x→−7) (x² − 49)/(x + 7)

  1. A−14
  2. B0
  3. C∞
  4. DLimit does not exist

(x² − 49)/(x + 7) = x − 7, which tends to −14.(x² − 49)/(x + 7) = x − 7, jo −14 ki taraf jata hai.

6.
★ Midterm past paper (Virtualians)Lecture 11

L − ε < f(x) < L + ε can be written as

  1. A|f(x) − L| < ε
  2. B|f(x) − L| > ε
  3. C|f(x) − L| < ε + 1
  4. DNone of these

Subtracting L gives −ε < f(x) − L < ε, which is |f(x) − L| < ε.L ghatane se −ε < f(x) − L < ε, yani |f(x) − L| < ε.

7.
★ Midterm past paper (Virtualians)Lecture 12

If a function satisfies the conditions: f(c) is defined, lim_{x→c⁺} f(x) exists, and lim_{x→c⁺} f(x) = f(c), then the function is said to be

  1. AContinuous at c
  2. BContinuous from left at c
  3. CContinuous from right at c
  4. DNone of these

Only the right-hand limit equals f(c), which is the definition of right continuity.Sirf right-hand limit f(c) ke barabar hai, yahi right continuity ki definition hai.

8.
★ Midterm Spring 2012 (Virtualians)Lecture 13

tan(x) is continuous everywhere except at points

  1. A±kπ/2 (k = 1, 3, 5, …)
  2. B±kπ/2 (k = 2, 4, 6, …)
  3. C±kπ/2 (k = 1, 2, 3, 4, 5, 6, …)

tan x = sin x/cos x is undefined where cos x = 0, i.e. at odd multiples of π/2.tan x = sin x/cos x wahan defined nahi jahan cos x = 0, yani π/2 ke odd multiples par.

9.
★ Midterm past paper (Virtualians)Lecture 16

If y = 1/(1 − x) then dy/dx =

  1. A1
  2. B−1
  3. C1/(1 − x)²
  4. D−1/(1 − x)²

d/dx (1 − x)⁻¹ = −(1 − x)⁻²·(−1) = 1/(1 − x)².d/dx (1 − x)⁻¹ = −(1 − x)⁻²·(−1) = 1/(1 − x)².

10.
★ Midterm past paper (Virtualians)Lecture 16

Suppose that f and g are differentiable functions of x, then d/dx [f][g] =

  1. A([f′][g] − [f][g′])/g²
  2. B[f′][g′]
  3. C[f′][g] + [f][g′]
  4. D[f′][g] − [f][g′]

This is the product rule.Ye product rule hai.

11.
★ Midterm past paper (Virtualians)Lecture 16

According to the power rule, if f(x) = xⁿ where n is a real number, then d/dx[xⁿ] =

  1. Axⁿ⁻¹
  2. Bnxⁿ⁻¹
  3. Cnxⁿ⁺¹
  4. D(n − 1)xⁿ⁺¹

Power rule: bring down n and reduce the exponent by 1.Power rule: n ko aage le aayein aur power ko 1 kam kar dein.

12.
★ Midterm Paper #1 (vuzs)Lecture 16

If f(x) = 3x⁸ + 2x + 1, then f′(x) = ______

  1. A3x⁷ + 2
  2. B24x⁷ + 2
  3. C3x⁹ + 2x²
  4. D24x⁹ + 2x²
13.
★ Midterm Paper #1 (vuzs)Lecture 16

For a function h(x) and a constant c, d/dx [c · h(x)] = ______

  1. A0
  2. Bd/dx h(x)
  3. Cd/dx h(cx)
  4. Dc · d/dx h(x)
14.
★ Midterm Paper #1 (vuzs)Lecture 16

If f and g are differentiable functions of x, then d/dx (f/g) = ______

  1. A(g·f′ − f·g′)/g²
  2. B(g′·f − f′·g)/g²
  3. C(g·f′ − f·g′)/f²
  4. D(g′·f − f′·g)/f²

Source marked option b, which is wrong. Quotient rule: (g f′ − f g′)/g²Source ne option b mark kiya hai jo ghalat hai. Quotient rule: (g f′ − f g′)/g²

15.
★ Midterm Paper #1 (vuzs)Lecture 16

The power rule d/dx [xⁿ] = n xⁿ⁻¹ holds if n is ______

  1. AAn integer
  2. BA rational number
  3. CAn irrational number
  4. DAll of the above
16.
★ Midterm Paper #1 (vuzs)Lecture 17

d/dx (tan x) = ______

  1. Asec x
  2. Bsec² x
  3. Ccosec x
  4. Dcosec² x
17.
★ Midterm Paper #1 (vuzs)Lecture 17

d/dx [sec x] = ______

  1. A1/(1 + sin² x)
  2. B−sin x/(1 + sin² x)
  3. C1/(1 − sin² x)
  4. Dsin x/(1 − sin² x)
18.
★ Midterm Paper #1 (vuzs)Lecture 17

d/dx [cosec x] = ______

  1. A1/(1 + cos² x)
  2. B−cos x/(1 − cos² x)
  3. Ccos x/(1 − cos² x)
  4. D1/(1 − cos² x)
19.
★ Midterm Paper #1 (vuzs)Lecture 18

If y = f(g(h(x))), u = g(h(x)) and v = h(x), then dy/dx = ______

  1. A(dy/du)·(du/dv)·(dv/dx)
  2. B(dy/du)(du/dv)(dv/dx) without multiplication
  3. C(dv/du)·(du/dv)·(dy/dx)
20.
★ Midterm Paper #1 (vuzs)Lecture 18

The chain rule is a rule for differentiating ______ of functions.

  1. AProduct
  2. BSum
  3. CDifference
  4. DComposition
21.
★ Midterm Paper #1 (vuzs)Lecture 18

Let y = (x³ + 2x)³⁷. Which is correct?

  1. Ady/dx = 37(x³ + 2x)³⁶
  2. Bdy/dx = 111x²(x³ + 2x)³⁶
  3. Cdy/dx = (111x² + 74)(x³ + 2x)³⁶
  4. Ddy/dx = (111x² + 74)(x³ + 2x)³⁸
22.
★ Midterm past paper (Virtualians)Lecture 19

If x² + y² = 9 then dy/dx =

  1. Ax/y
  2. B−x/y
  3. C−y/x
  4. Dy/x

Implicitly 2x + 2y·y′ = 0, so y′ = −x/y.Implicit differentiation se 2x + 2y·y′ = 0, isliye y′ = −x/y.

23.
★ Midterm Paper #1 (vuzs)Lecture 19

If xy = 4, then dy/dx = ______

  1. A0
  2. B−1/x²
  3. C4/x²
  4. D−4/x²
24.
★ Midterm Paper #1 (vuzs)Lecture 19

If 2x − y = −3, then dy/dx = ______

  1. A2
  2. B−2
  3. C0
  4. D−3
25.
★ Midterm Paper #1 (vuzs)Lecture 19

If x² + y² = 1, then dy/dx = ______

  1. A−x/y
  2. Bx/y
  3. C−y/x
  4. DNone of these

Source marked −y/x, which is wrong. 2x + 2y y′ = 0 → y′ = −x/ySource ne −y/x mark kiya hai jo ghalat hai. 2x + 2y y′ = 0 → y′ = −x/y

26.
★ Midterm past paper (Virtualians)

The base of the natural logarithm is

  1. A2.71
  2. B10
  3. C5
  4. DNone of these

The natural log uses base e ≈ 2.718, so 2.71 is the closest option.Natural log ka base e ≈ 2.718 hai, isliye options mein 2.71 sab se qareeb hai.

27.
★ Midterm past paper (Virtualians)

A line x = x₀ is called ______ for the graph of a function f if f(x) → +∞ or f(x) → −∞ as x approaches x₀ from the right or from the left.

  1. AHorizontal asymptotes
  2. BNone of these
  3. CVertical asymptotes

Unbounded growth of f(x) as x → x₀ defines a vertical asymptote x = x₀.Jab x → x₀ par f(x) be-hadd barhe ya ghate, to x = x₀ vertical asymptote hoti hai.

28.
★ Midterm past paper (Virtualians)

If f″(x) > 0 on an open interval (a, b), then which of the following statements is correct?

  1. Af is concave up on (a, b).
  2. Bf is concave down on (a, b).
  3. Cf is linear on (a, b).

A positive second derivative means f is concave up.Second derivative positive ho to f concave up hota hai.

29.
★ Midterm past paper (Virtualians)

If x > 0 then d/dx [ln x] =

  1. A1
  2. Bx
  3. C1/x
  4. Dln(1/x)

The derivative of ln x is 1/x.ln x ka derivative 1/x hai.

30.
★ Midterm past paper (Virtualians)

Let a function f be defined on an interval, and let x₁ and x₂ denote points in that interval. If f(x₁) < f(x₂) whenever x₁ < x₂, then which of the following statements is correct?

  1. Af is an increasing function.
  2. Bf is a decreasing function.
  3. Cf is a constant function.

Larger inputs give larger outputs, which defines an increasing function.Bara input bara output de to function increasing hota hai.

31.
★ Midterm Fall 2010 (Virtualians)

Let f be defined on an interval and x₁, x₂ points in it. If f(x₁) > f(x₂) whenever x₁ < x₂, which statement is correct?

  1. Af is an increasing function.
  2. Bf is a decreasing function.
  3. Cf is a constant function.

Larger inputs give smaller outputs, which is the definition of decreasing.Bara input chhota output de to function decreasing hota hai.

32.
★ Midterm past paper (Virtualians)

If b > 0 then d/dx[bˣ] = ____

  1. A0
  2. Bxbˣ⁻¹
  3. Cln b
  4. Dbˣ ln b

d/dx[bˣ] = bˣ ln b for b > 0.b > 0 ke liye d/dx[bˣ] = bˣ ln b.

33.
★ Midterm past paper (Virtualians)

Let x₀ be critical points of the function f. Those critical points for which f′(x₀) = 0 are called ____ of f.

  1. ALocal points
  2. BEnd points
  3. CStationary points

Critical points where the derivative is zero are called stationary points.Jin critical points par derivative zero ho, unhein stationary points kehte hain.

34.
★ Midterm Paper #1 (vuzs)

If f is twice differentiable at a stationary point x₀ and f″(x₀) > 0, then f has a relative ______ at x₀.

  1. AMinima
  2. BMaxima
  3. CNone of these
35.
★ Midterm Paper #1 (vuzs)

If f is twice differentiable at a stationary point x₀ and f″(x₀) < 0, then f has a relative ______ at x₀.

  1. AMinima
  2. BMaxima
  3. CNone of these
36.
★ Midterm Paper #1 (vuzs)

A line y = y₀ is called a ______ for the graph of f if lim(x→+∞) f(x) = y₀ or lim(x→−∞) f(x) = y₀.

  1. AVertical asymptote
  2. BHorizontal asymptote
  3. CNone of these
37.
★ Midterm Paper #1 (vuzs)

30° = ______ radians

  1. Aπ/3
  2. Bπ/4
  3. Cπ/6
  4. Dπ/2
38.
★ Midterm Paper #1 (vuzs)

Let f be defined on an interval and x₁, x₂ be any two distinct points in it. If f(x₁) = f(x₂) for all such points, then:

  1. Af is a decreasing function
  2. Bf is an increasing function
  3. Cf is a constant function
39.
★ Midterm Paper #1 (vuzs)

If f″(x) < 0 on an open interval (a, b), then:

  1. Af is concave up on (a, b)
  2. Bf is concave down on (a, b)
  3. Cf is linear on (a, b)
40.
★ Midterm Paper #1 (vuzs)

If x > 1/2, then d/dx [ln 2x] = ______

  1. A1/x
  2. B2/x
  3. C1/(2x)
  4. D2/x²
41.
★ Midterm Paper #1 (vuzs)

log_b (ac) = ______

  1. Alog_b a + log_b c
  2. Blog_b a − log_b c
  3. Clog_b a / log_b c
  4. D(log_b a)(log_b c)
42.
★ Midterm Paper #1 (vuzs)

log_b (aʳ) = ______

  1. Aa log_b r
  2. Br log_b a
  3. Clog_b a / log_b r
  4. Dlog_b a + log_b r
43.
★ Midterm Paper #1 (vuzs)

log_b (1/c) = ______

  1. Alog_b c
  2. B1 − log_b c
  3. C−log_b c
  4. D1 + log_b c
44.
★ Midterm Paper #1 (vuzs)

log_b (1/t) = ______

  1. Alog_b t
  2. B1 − log_b t
  3. C1 + log_b t
  4. D−log_b t
45.
Lecture 1

The simplest numbers are the ____?

  1. AReal numbers
  2. BOdd numbers
  3. CComplex numbers
  4. DNatural numbers
46.
Lecture 1

The natural numbers form a subset of a larger class of numbers called the ____.

  1. ASubset of natural no.
  2. BIntegers
  3. CSet
  4. DBoth a and b
47.
Lecture 1

The collection of things with reference of numbers is called

  1. AInformation
  2. BCounting
  3. CSet
  4. DInteger
48.
Lecture 1

If A is the subset of B then

  1. AA⊆B
  2. BB⊆A
  3. CB⊆B
  4. DA⊆A
49.
Lecture 1

We have two sets A={1, 2, 3, 4, 5} & B={2, 3}; what is the correct option belonging to these two sets?

  1. AA is subset of B
  2. BB is subset of A
  3. CB⊆A
  4. DBoth b and c
50.
Lecture 1

x + 2 = 0. The solution is ____?

  1. Ax = −2
  2. Bx = +2
  3. Cx = 1
  4. Dx = −1
51.
Lecture 1

The integers in turn are a subset of a still larger class of numbers called the

  1. Arational numbers
  2. Bnatural numbers
  3. Cirrational numbers
  4. Dreal numbers
52.
Lecture 1

____ was an ancient Greek philosopher and mathematician who studied the properties of numbers.

  1. ARobert Hooke
  2. BPythagoras
  3. CH. Methelda
  4. DBoth a and b
53.
Lecture 1

Pythagoras concluded that the size of a physical quantity must consist of a ____ of an additional unit.

  1. Awhole number + some fraction m/n
  2. Bnegative number + some fraction m/n
  3. Cnatural number + some fraction m/n
  4. Dreal number + some fraction m/n
54.
Lecture 1

Using geometric methods, Pythagoras showed that the hypotenuse of the right triangle with base and opposite side equal to ____ cannot be expressed as the ratio of integers.

  1. A0
  2. B1
  3. C−1
  4. DBoth a and b
55.
Lecture 1

The rational and irrational numbers together comprise a larger class of numbers, called

  1. AReal numbers
  2. BWhole numbers
  3. CNatural numbers
  4. DEven numbers
56.
Lecture 1

A = {1,2,3,4}, B = {1,2,3,4,5,6,7}, then A ∪ B =

  1. A{1,1,2,3,4,5,6,7}
  2. B{1,2,3,4,4,5,6,7}
  3. C{1,2,3,4,5,6,6,7}
  4. D{1,2,3,4,5,6,7}
57.
Lecture 1

A = {1,2,3,4}, B = {1,2,3,4,5,6,7}, then A ∩ B =

  1. A{1,2,3,4,5,6}
  2. B{1,2,3,4}
  3. C{1,2,3,4,5,6,6,7}
  4. D{1,2,3,4,5}
58.
Lecture 1

The set {, −4, −3, −2, −1, 0, 1, 2, 3, 4, } is known as set of ____

  1. ANatural numbers
  2. BIntegers
  3. CWhole numbers
  4. DNone of these

This set includes negative numbers and zero, so it is the integers.Is set mein negative numbers aur zero bhi hain, isliye yeh integers ka set hai.

59.
Lecture 1

π is called

  1. AAn integer
  2. BA rational number
  3. CAn irrational number
  4. DA natural number

π cannot be written as a ratio of integers, so it is irrational.π ko integers ke ratio ki shakal mein nahi likha ja sakta, isliye yeh irrational hai.

60.
Lecture 1

There is a one-to-one correspondence between the points on the coordinate line and ________

  1. ASet of natural numbers
  2. BSet of integers
  3. CSet of irrational numbers
  4. DSet of real numbers
61.
Lecture 1

The set of rational numbers is a subset of

  1. AIntegers
  2. BNatural numbers
  3. COdd integers
  4. DReal numbers

Every rational number is a real number.Har rational number real number bhi hota hai.

62.
Lecture 1

What is Calculus primarily concerned with?

  1. AStudy of whole numbers
  2. BStudy of the continuous rates of change of quantities
  3. CStudy of imaginary numbers
  4. DStudy of historical numerical systems

Calculus studies how quantities change continuously.Calculus yeh study karta hai ke quantities continuously kaise change hoti hain.

63.
Lecture 1

Historically, which numbers were the first to be used by humans, for counting?

  1. ARational Numbers
  2. BComplex Numbers
  3. CNatural Numbers
  4. DIrrational Numbers

Natural numbers (1, 2, 3, ...) arose first, from counting.Sab se pehle natural numbers (1, 2, 3, ...) aaye, ginti karne se.

64.
Lecture 1

The set of rational numbers is a subset of which set?

  1. ANatural numbers
  2. BIntegers
  3. CReal numbers
  4. DIrrational numbers

Every rational number is a real number, so Q ⊂ R.Har rational number real number hota hai, isliye Q ⊂ R.

65.
Lecture 1

Who demonstrated the existence of irrational numbers?

  1. APythagoras
  2. BHippasus of Metapontum
  3. CDescartes
  4. DEuclid

Hippasus, a Pythagorean, showed that √2 is irrational.Hippasus, jo ek Pythagorean tha, ne dikhaya ke √2 irrational hai.

66.
Lecture 1

Who is credited with developing analytic geometry?

  1. APythagoras
  2. BHippasus
  3. CDescartes
  4. DEinstein

René Descartes linked algebra and geometry using coordinates.René Descartes ne coordinates ke zariye algebra aur geometry ko jora.

67.
Lecture 1

What does the closed interval [a, b] include?

  1. AIncludes a but excludes b
  2. BIncludes both a and b
  3. CExcludes both a and b
  4. DIncludes b but excludes a

Square brackets mean the endpoint is included.Square brackets ka matlab hai ke endpoint shamil hai.

68.
Lecture 1

Which notation excludes both endpoints of an interval?

  1. A(a, b)
  2. B[a, b]
  3. C{a, b}
  4. D(a, b]

Round brackets on both sides exclude both a and b.Dono taraf round brackets hon to a aur b dono shamil nahi hote.

69.
Lecture 1

What does the set-builder notation specify?

  1. AExact set elements
  2. BAll real numbers
  3. CSet with only integers
  4. DSet elements based on a property

Set-builder notation {x : property} describes elements by a property they satisfy.Set-builder notation {x : property} elements ko us property se batata hai jo woh satisfy karte hain.

70.
Lecture 1

What does the inequality a ≥ b mean?

  1. Aa is greater than b
  2. Ba is less than b
  3. Ca is greater than or equal to b
  4. Da is equal to b

a ≥ b means a > b or a = b.a ≥ b ka matlab hai a > b ya a = b.

71.
Lecture 1

What does the symbol +∞ represent?

  1. APositive infinity
  2. BNegative infinity
  3. CUndefined value
  4. DFinite value
72.
Lecture 1

What is the solution set of an inequality?

  1. ASet of all possible numbers
  2. BSet of positive integers
  3. CSet of numbers satisfying the inequality
  4. DSet of imaginary numbers

It is the set of all values of the variable that make the inequality true.Yeh variable ki un sab values ka set hai jo inequality ko sahi banati hain.

73.
Lecture 1

What is the solution set of 37 ≤ 2x + 9?

  1. A[14, +∞)
  2. B(14, +∞)
  3. C(−∞, 14]
  4. D[23, +∞)

37 − 9 ≤ 2x gives 28 ≤ 2x, so x ≥ 14.37 − 9 ≤ 2x se 28 ≤ 2x milta hai, isliye x ≥ 14.

74.
Lecture 1

What is the solution set of 7 ≤ 2 − 5x < 9?

  1. A(−7/5, −1]
  2. B(−1, 7/5]
  3. C[−7/5, −1)
  4. D[1, 7/5)

Subtract 2: 5 ≤ −5x < 7; divide by −5 and reverse: −7/5 < x ≤ −1.2 minus karo: 5 ≤ −5x < 7; phir −5 se divide karo aur sign ulta karo: −7/5 < x ≤ −1.

75.
Lecture 1

What does the set {x: 2 < x < 3} represent?

  1. AThe open interval (2, 3)
  2. BThe closed interval [2, 3]
  3. COnly the numbers 2 and 3
  4. DAll integers between 2 and 3

Strict inequalities on both sides give the open interval (2, 3).Dono taraf strict inequalities hon to open interval (2, 3) banta hai.

76.
Lecture 2

The absolute value or magnitude of a real number a is denoted by |a| and is defined by

  1. A|a| = a if a ≥ 0, that is, a is non-negative
  2. B−a if a < 0, that is, −a is positive
  3. CBoth a and b
  4. DNone of these
77.
Lecture 2

√(a²) = |a| is used for any

  1. AReal number
  2. BAbsolute value
  3. CNatural number
  4. DWhole number
78.
Lecture 2

|x² − 9| = ____

  1. A|(x − 3)²|
  2. B|(x + 3)²|
  3. C|x − 3||x + 3|
  4. D|x + 3||x + 3|

x² − 9 = (x − 3)(x + 3).Yahan x² − 9 = (x − 3)(x + 3) hota hai.

79.
Lecture 2

|x − 3| < 1 implies

  1. A−4 < x < 4
  2. B2 < x < 4
  3. C−2 < x < −4
  4. Dx − 3 < 1

−1 < x − 3 < 1 gives 2 < x < 4.−1 < x − 3 < 1 se 2 < x < 4 milta hai.

80.
Lecture 2

What does the absolute value or magnitude of a real number denote?

  1. AIts positivity
  2. BIts negativity
  3. CIts distance from zero
  4. DIts sign

|a| is the distance from a to 0 on the number line.|a| number line par a se 0 tak ka distance hai.

81.
Lecture 2

If a ≥ 0, then |a| equals:

  1. Aa
  2. B−a
  3. C0
  4. D−|a|

If a ≥ 0, |a| = a.Agar a ≥ 0 ho to |a| = a.

82.
Lecture 2

Which statement about 0 is true?

  1. AIt is positive
  2. BIt is negative
  3. CIt is neither positive nor negative
  4. DIt is both positive and negative

0 is neither positive nor negative.0 na positive hai na negative.

83.
Lecture 2

What happens when you take the absolute value of a negative number?

  1. AIt becomes negative
  2. BIt becomes positive
  3. CIt becomes zero
  4. DIt stays negative

If a < 0, |a| = −a, which is positive.Agar a < 0 ho to |a| = −a, jo positive hota hai.

84.
Lecture 2

For a real number a, which statement is always true?

  1. A−a is negative
  2. B−a can be positive, negative or zero, depending on a
  3. C+a is always positive
  4. D−a is always positive

If a is negative, then −a is positive, so the sign of −a depends on a.Agar a negative ho to −a positive hota hai, isliye −a ka sign a par depend karta hai.

85.
Lecture 2

For any real number a, √(a²) equals:

  1. Aa
  2. B−a
  3. C|a|
  4. Da²

Example: √((−3)²) = √9 = 3 = |−3|.Misal: √((−3)²) = √9 = 3 = |−3|.

86.
Lecture 2

Which statement is true for all real numbers a and b?

  1. A|ab| = |a||b|
  2. B|a + b| = |a| + |b|
  3. C|a − b| = |a| − |b|
  4. D|−a| = −|a|

The absolute value of a product equals the product of the absolute values.Product ki absolute value, absolute values ke product ke barabar hoti hai.

87.
Lecture 2

Points A and B on a coordinate line have coordinates a and b. What is the distance between A and B?

  1. A|b − a|
  2. Bb + a
  3. C|a| + |b|
  4. D|a| − |b|

Distance between points with coordinates a and b is |b − a| (= |a − b|).Coordinates a aur b wale points ke darmiyan distance |b − a| (= |a − b|) hota hai.

88.
Lecture 2

What is the geometric interpretation of |x+a| on a coordinate line?

  1. ADistance between x and a
  2. BDistance between x and origin
  3. CDistance between x and -a
  4. DDistance between a and origin

|x + a| = |x − (−a)|, the distance between x and −a.|x + a| = |x − (−a)|, yani x aur −a ke darmiyan distance.

89.
Lecture 2

For k > 0, the inequality |x − a| < k is equivalent to:

  1. A-k < x-a < k
  2. Bx-a < -k or x-a > k
  3. Cx-a ≤ k
  4. D-k ≤ x-a ≤ k

|x − a| < k means x − a lies strictly between −k and k.|x − a| < k ka matlab hai ke x − a sirf −k aur k ke beech mein hai (barabar nahi).

90.
Lecture 2

What is the Triangle Inequality theorem about?

  1. AAbsolute value of a sum is less than or equal to the sum of the absolute values
  2. BAbsolute value of a difference is always greater than the sum of the absolute values
  3. CAbsolute value of a sum is always greater than the difference of the absolute values
  4. DAbsolute value of a difference is less than the sum of the absolute values

Triangle inequality: |a + b| ≤ |a| + |b|.Triangle inequality: |a + b| ≤ |a| + |b|.

91.
Lecture 2

For all real a and b, which is always true?

  1. Aa + b = |a + b|
  2. B|a + b| ≤ a + b
  3. C|a + b| ≥ a + b
  4. D|a + b| = −(a + b)

A number is never larger than its absolute value, so a + b ≤ |a + b|.Koi number apni absolute value se kabhi bara nahi hota, isliye a + b ≤ |a + b|.

92.
Lecture 3

To plot a point P(a, b) means to locate the point with ____ in a coordinate plane

  1. Acoordinates (a, c)
  2. Bcoordinates (a, b)
  3. Ccoordinates (b, c)
  4. Dcoordinates (b, a)
93.
Lecture 3

The coordinate plane and the ordered pairs we just discussed are together known as the

  1. ARectangular coordinate system
  2. BRectangular graph system
  3. CRectangular plan system
  4. DBoth a and b
94.
Lecture 3

In a rectangular coordinate system the coordinate axes divide the plane into four regions called

  1. APlanes
  2. BAxes
  3. CQuadrants
  4. DBoth a and c
95.
Lecture 3

Upper left quadrant is called

  1. A(I)
  2. B(II)
  3. C(III)
  4. D(IV)
96.
Lecture 3

Lower right quadrant is called

  1. A(I)
  2. B(II)
  3. C(III)
  4. D(IV)
97.
Lecture 3

What signs are written with the 1st quadrant?

  1. A(−, +)
  2. B(+, +)
  3. C(+, −)
  4. D(−, −)
98.
Lecture 3

6x − 4y = 10; its solution is?

  1. A6 − 4 = 10
  2. B6(3) − 4(2) = 10
  3. C6(2) − 4(0) = 18 is not 10
  4. D6(0) − 4(0) = 10
99.
Lecture 3

The ____ of an equation in two variables x and y is the set of all points in the xy-plane whose coordinates are members of the solution set of the equation.

  1. AGraph
  2. BPlane
  3. CNumbers
  4. DAxes
100.
Lecture 3

When a graph is obtained by plotting points, whether by ____, there is no guarantee that the resulting curve has the correct shape

  1. AHand
  2. BCalculator
  3. CComputer
  4. DAll of these
101.
Lecture 3

The number a is called an x-intercept of the graph and the number b a y-intercept; then:

  1. Ax-axis = (a, 0), y-axis = (0, b)
  2. Bx-axis = (a, 1), y-axis = (1, b)
  3. Cx-axis = (a, 1), y-axis = (0, b)
  4. Dx-axis = (a, 0), y-axis = (1, b)
102.
Lecture 3

____ is at the heart of many mathematical arguments concerning the structure of the universe, and certainly symmetry plays an important role in applied mathematics and engineering fields

  1. AQuadrant
  2. BPlane
  3. CLine
  4. DSymmetry
103.
Lecture 3

The graph x = y² is symmetric about

  1. AY-axis
  2. BOrigin
  3. CX-axis
  4. DNone of these
104.
Lecture 3

Number of x- and y-intercepts for the equation y = 1/x

  1. ATwo x-intercepts
  2. BTwo y-intercepts
  3. CNo x and no y intercepts
  4. DNone of these
105.
Lecture 3

The graph of an equation is the set of points in the xy-plane that ____ the equation.

  1. ASatisfy
  2. BDo not satisfy
106.
Lecture 3

What does a point in the coordinate plane correspond to?

  1. AOne real number
  2. BA line
  3. CAn ordered pair of real numbers
  4. DTwo real numbers in any order

Each point corresponds to an ordered pair (x, y).Har point ek ordered pair (x, y) se juda hota hai.

107.
Lecture 3

Two coordinate lines that meet at right angles at their origins determine a:

  1. ACoordinate plane
  2. BSingle quadrant
  3. CNumber line
  4. DClosed interval

Two perpendicular coordinate axes meeting at the origin set up a coordinate plane.Origin par milne wale do perpendicular coordinate axes coordinate plane banate hain.

108.
Lecture 3

What does the graph of an equation in two variables represent?

  1. AThe set of all points whose coordinates satisfy the equation
  2. BA straight line
  3. CA curve passing through the origin
  4. DA specific point in the xy-plane
109.
Lecture 3

What is the significance of intercepts in a graph?

  1. AThey represent the origin
  2. BThey are points of intersection with the coordinate axes
  3. CThey define the maximum and minimum values
  4. DThey indicate the turning points of a curve

Intercepts are where the graph meets the x-axis or y-axis.Intercepts woh jagah hain jahan graph x-axis ya y-axis se milta hai.

110.
Lecture 3

How many quadrants does a rectangular coordinate system divide the plane into?

  1. ASix
  2. BTwo
  3. CFour
  4. DEight
111.
Lecture 3

In the equation 2x + 3y = 5, what does a solution represent?

  1. AAn ordered pair of real numbers satisfying the equation
  2. BA single real number
  3. CA line on the graph
  4. DA set of ordered pairs

A solution is a pair (x, y) that makes the equation true, e.g. (1, 1).Solution woh pair (x, y) hai jo equation ko sahi banaye, maslan (1, 1).

112.
Lecture 3

What does symmetry aid in graphing?

  1. AReducing computational work
  2. BGenerating complex shapes
  3. CCreating curves
  4. DFitting equations into the coordinate plane

With symmetry you plot half the graph and reflect it.Symmetry ho to aadha graph plot karo aur usay reflect kar do.

113.
Lecture 3

A graph is symmetric about the x-axis if, whenever (x, y) is on the graph, so is:

  1. A(x, −y)
  2. B(−x, y)
  3. C(−x, −y)
  4. D(y, x)

Reflecting (x, y) across the x-axis gives (x, −y).(x, y) ko x-axis ke across reflect karo to (x, −y) milta hai.

114.
Lecture 3

What defines the y-intercept of a graph?

  1. AThe point where the graph intersects the y-axis
  2. BThe maximum value on the y-axis
  3. CA turning point for the curve
  4. DThe origin of the graph

The y-intercept is where the graph meets the y-axis (x = 0).y-intercept woh jagah hai jahan graph y-axis se milta hai (x = 0).

115.
Lecture 3

What are the coordinates of the origin in the xy-plane?

  1. A(1, 1)
  2. B(0, 1)
  3. C(0, 0)
  4. D(1, 0)

The origin is where the axes meet: (0, 0).Origin woh point hai jahan axes milte hain: (0, 0).

116.
Lecture 3

A graph is symmetric about the origin if, whenever (x, y) is on the graph, so is:

  1. A(x, −y)
  2. B(−x, y)
  3. C(−x, −y)
  4. D(y, x)

Reflecting (x, y) through the origin gives (−x, −y).(x, y) ko origin ke through reflect karo to (−x, −y) milta hai.

117.
Lecture 3

In which quadrant are both x and y negative?

  1. AQuadrant I
  2. BQuadrant II
  3. CQuadrant III
  4. DQuadrant IV

Quadrant III is the lower-left region: x < 0 and y < 0.Quadrant III neeche baayen wala hissa hai: x < 0 aur y < 0.

118.
Lecture 3

For nonzero x and y, the points (x, y), (−x, y), (x, −y) and (−x, −y) are the vertices of which shape?

  1. ASquare
  2. BCircle
  3. CRectangle
  4. DRhombus

The four points are reflections of each other across both axes, giving a rectangle centred at the origin.Chaaron points dono axes ke across ek doosre ke reflections hain, isliye origin par centred rectangle banta hai.

119.
Lecture 4

Slope of a hill is the ____ of its rise to its run:

  1. ARatio
  2. BEquation
  3. CRate
  4. DTime
120.
Lecture 4

Slope m is sometimes called the rate of change of y with respect to

  1. Ay along axis
  2. Bx along axis
  3. Cy along the line
  4. Dx along the line
121.
Lecture 4

Slope of a line can be

  1. Apositive
  2. Bnegative
  3. Czero
  4. DAll of these
122.
Lecture 4

For a line L not parallel to the x-axis, the angle of ____ is the smallest angle measured counterclockwise from the direction of the positive x-axis to L

  1. AIncidence
  2. BReflection
  3. CQuadrination
  4. DInclination
123.
Lecture 4

The line with y-intercept b and slope m is given by the equation y = mx + b, called ____

  1. Aslope-intercept form of the line
  2. Bplane-intercept form of the slope
  3. Cangle-intercept form of the line
  4. Dangle-intercept form of the slope
124.
Lecture 4

[Ax + By + C = 0] where A, B and C are constants and A and B are not both zero, is called a ____-degree equation in x and y

  1. AFirst
  2. BSecond
  3. CThird
  4. DFourth
125.
Lecture 4

We use the equations of lines called ____ to study motions

  1. ACoordinate equations
  2. BLinear equations
  3. CNegative equations
  4. DPositive equations
126.
Lecture 4

If two lines have the same slope, say 1, then these two lines are ________

  1. AParallel to each other
  2. BParallel to x-axis
  3. CParallel to y-axis
  4. DPerpendicular to each other
127.
Lecture 4

A constant function has the slope

  1. APositive
  2. BNegative
  3. CZero
128.
Lecture 4

A decreasing function has the slope

  1. ANegative
  2. BPositive
  3. CZero
129.
Lecture 4

The equation of a line of the form [y = mx + b] is known as

  1. APoint-slope form
  2. BTwo points form
  3. CIntercepts form
  4. DSlope intercept form
130.
Lecture 4

The equation of a line of the form y − y₁ = m(x − x₁) is known as

  1. APoint-slope form
  2. BTwo points form
  3. CIntercepts form
  4. DSlope intercept form
131.
Lecture 4

For points P₁(x₁, y₁) and P₂(x₂, y₂) on a non-vertical line, the slope m is:

  1. A(y₂ − y₁)/(x₂ − x₁)
  2. B(x₂ − x₁)/(y₂ − y₁)
  3. C(x₁ − x₂)/(y₂ − y₁)
  4. D(y₂ + y₁)/(x₂ + x₁)

m = rise/run = (y₂ − y₁)/(x₂ − x₁).Yahan m = rise/run = (y₂ − y₁)/(x₂ − x₁).

132.
Lecture 4

What does the slope measure for a line in the xy-plane?

  1. AHorizontal distance
  2. BVertical distance
  3. CRatio of rise to run
  4. DDistance from the origin

Slope = rise/run = change in y over change in x.Slope = rise/run, yani y ki change divided by x ki change.

133.
Lecture 4

Why is the slope of a vertical line undefined?

  1. ABecause the rise is zero
  2. BBecause the run x₂ − x₁ is zero, giving division by zero
  3. CBecause the line passes through the origin
  4. DBecause the slope is always negative

On a vertical line x₂ − x₁ = 0, so (y₂ − y₁)/(x₂ − x₁) divides by zero.Vertical line par x₂ − x₁ = 0 hota hai, isliye (y₂ − y₁)/(x₂ − x₁) mein zero se divide hota hai.

134.
Lecture 4

What does the term "rate of change of y with respect to x" refer to?

  1. ASlope
  2. BDistance
  3. CChange in y
  4. DChange in x

Slope is the rate of change of y with respect to x.Slope x ke respect se y ka rate of change hai.

135.
Lecture 4

The angle of inclination of a line is:

  1. AThe slope itself
  2. BThe angle the line makes with the positive x-axis
  3. CThe length of the line segment
  4. DThe y-intercept of the line

The angle of inclination φ is measured from the positive x-axis; m = tan φ.Angle of inclination φ positive x-axis se naapa jata hai; m = tan φ.

136.
Lecture 4

What defines the perpendicularity of two non-vertical lines?

  1. AThe product of their slopes is 1
  2. BThe product of their slopes is -1
  3. CThe sum of their slopes is 0
  4. DThe difference of their slopes is 1

Non-vertical lines are perpendicular when m₁m₂ = −1.Non-vertical lines tab perpendicular hoti hain jab m₁m₂ = −1 ho.

137.
Lecture 4

Points A(1, 3), B(3, 7) and C(7, 5) form a right triangle because the slopes m₁ of AB and m₂ of BC satisfy:

  1. Am1m2 = -1
  2. Bm1 = m2
  3. Cm1 = -m2
  4. Dm1m2 = 1

m(AB) = 4/2 = 2 and m(BC) = −2/4 = −1/2; product −1, so the angle at B is 90°.m(AB) = 4/2 = 2 aur m(BC) = −2/4 = −1/2; product −1 hai, isliye B par angle 90° hai.

138.
Lecture 4

Which equation (k a constant) represents a line parallel to the x-axis?

  1. Ax = k
  2. By = k
  3. Cy = x
  4. Dx + y = 0

A horizontal line has the same y-value everywhere: y = constant.Horizontal line par har jagah y-value same hoti hai: y = constant.

139.
Lecture 4

What is the equation of the line through P₁(x₁, y₁) with slope m?

  1. Ay − y₁ = m(x − x₁)
  2. By − y₁ = m(x + x₁)
  3. Cx − x₁ = m(y − y₁)
  4. Dy + y₁ = m(x + x₁)

Point-slope form: y − y₁ = m(x − x₁).Point-slope form: y − y₁ = m(x − x₁).

140.
Lecture 4

Which form represents the equation of a line with slope m and y-intercept b?

  1. Ay = mx+b
  2. Bx = my+b
  3. Cy = mx-b
  4. Dx = my-b

Slope-intercept form: y = mx + b.Slope-intercept form: y = mx + b.

141.
Lecture 4

What is the slope-intercept form of the equation for a line with slope -9 and y-intercept -4?

  1. Ay = -9x+4
  2. By = -9x-4
  3. Cy = 9x-4
  4. Dy = 9x+4

Put m = −9 and b = −4 into y = mx + b.y = mx + b mein m = −9 aur b = −4 rakh do.

142.
Lecture 4

What are the slope m and y-intercept b of the line 8x + 5y = 20?

  1. Am = −8/5, b = 4
  2. Bm = 8/5, b = 4
  3. Cm = −8/5, b = 20
  4. Dm = −5/8, b = 4

5y = −8x + 20, so y = −(8/5)x + 4.5y = −8x + 20, isliye y = −(8/5)x + 4.

143.
Lecture 4

What does slope describe in various contexts such as roadbeds and roofs?

  1. ASpeed
  2. BSteepness
  3. CDistance
  4. DTime

Slope measures how steep a road, roof or line is.Slope batata hai ke road, roof ya line kitni steep hai.

144.
Lecture 4

The linear equation F = 9/5C + 32 relates which temperature scales?

  1. AKelvin and Celsius
  2. BFahrenheit and Kelvin
  3. CFahrenheit and Celsius
  4. DCelsius and Rankine
145.
Lecture 4

Which of the following does NOT determine a unique line?

  1. AA point and a slope
  2. BTwo distinct points
  3. CA slope and a y-intercept
  4. DA slope alone

A slope alone gives a whole family of parallel lines.Sirf slope se parallel lines ki poori family milti hai.

146.
Lecture 4

The vertical line x = a (parallel to the y-axis) crosses the x-axis at:

  1. A(a, 0)
  2. B(0, a)
  3. C(a, a)
  4. DIt never crosses the x-axis

Every point on x = a has x-coordinate a, so it meets the x-axis at (a, 0).x = a ke har point ka x-coordinate a hai, isliye yeh x-axis se (a, 0) par milti hai.

147.
Lecture 5

The distance d between two points (x₁, y₁) and (x₂, y₂) in a coordinate plane is given by

  1. Ad = √(|x₂ − x₁|² + |y₂ − y₁|²)
  2. Bd = √(|y₂ − y₁|² − |x₂ − x₁|²)
  3. Cd = √(|x₂ − x₁|² − |y₂ − y₁|²)
  4. Dd = (√(|y₂ − y₁|² + |x₂ − x₁|))²
148.
Lecture 5

The distance between two points P1 and P2 in a coordinate plane is commonly denoted by

  1. Ad(P1, P2)
  2. Bd(P2, P1)
  3. Cd(P2, P2)
  4. DBoth a and b
149.
Lecture 5

The midpoint of the line segment joining two points (x₁, y₁) and (x₂, y₂) in a coordinate plane is

  1. A(x, y) = (½(x₁ + x₂), ½(y₁ + y₂))
  2. B(y, y) = (½(x₁ + x₂), ½(y₁ + y₂))
  3. C(x, x) = (½(x₁ + x₂), ½(y₁ + y₂))
  4. D(x, y) = (½(y₁ + y₂), ½(y₁ + y₂))
150.
Lecture 5

This is called the standard form of the equation of a circle.

  1. A(x − x₀)²
  2. B(y − y₀)²
  3. C(x − x₀)² + (y − y₀)² = r²
  4. D(x − x₀)² − (y − y₀)² = r²
151.
Lecture 5

The x-coordinate of the centre is

  1. Ax₀ (x naught)
  2. By₀ (y naught)
  3. C0
  4. DBoth a and b
152.
Lecture 5

The y-coordinate of the centre is

  1. Ax₀ (x naught)
  2. By₀ (y naught)
  3. C0
  4. DBoth a and b
153.
Lecture 5

The circle x² + y² = 1, which is centered at the origin and has radius 1, is of special importance; it is called the:

  1. Aunit circle
  2. Bmid point
  3. Cradius
  4. Dcenter
154.
Lecture 5

The x-coordinate of the vertex of the parabola can be found by the following formula

  1. Ay = −b/2a
  2. Bx = −b/2a
  3. Cy = b/2a
  4. Dx = b/2a
155.
Lecture 5

[For the parabola y = x² − 2x − 2] To find these intercepts we set y = 0 to obtain

  1. Ax² − 2x − 2 = 0
  2. Bx² − 2x − 2 = 1
  3. Cx² − 2x − 2 = 2
  4. Dx² − 2x − 2 = 3
156.
Lecture 5

The height of the graph of a quadratic is maximum or minimum, depending on whether the graph opens

  1. AUp
  2. BDown
  3. CLong
  4. DBoth a and b
157.
Lecture 5

The centre and the radius of the circle (x + 5)² + (y − 3)² = 16 is

  1. A(5, −3), 16
  2. B(5, −3), 4
  3. C(−5, 3), 4
  4. DNone of these

Centre (−5, 3), radius √16 = 4.Centre (−5, 3) hai aur radius √16 = 4 hai.

158.
Lecture 5

A line is called a tangent line to the circle if it meets the circle at precisely ____

  1. AOne point
  2. BTwo points
  3. CInfinite points
  4. DNone of these
159.
Lecture 5

The equation (x + 4)² + (y − 1)² = 6 represents a circle having center at ____ and radius ____

  1. A(−4, 1), √6
  2. B(−4, 1), 6
  3. C(−4, −1), √6
  4. DNone of these

Centre (−4, 1), radius √6.Centre (−4, 1) hai aur radius √6 hai.

160.
Lecture 5

Graph of the equation x² + y² = 9 represents a ____

  1. ACircle
  2. BParabola
  3. CEllipse
  4. DNone of these
161.
Lecture 5

An equation of the form [y = ax² + bx + c] is called ____

  1. AParabolic
  2. BCubic
  3. CQuadratic
162.
Lecture 6

The area A of a circle depends on its ____ by the formula A = πr²

  1. Aradius
  2. Bcentre
  3. Cheight
  4. Dbreadth
163.
Lecture 6

Velocity is a ____ of time

  1. ASpeed
  2. BLength
  3. CArea
  4. DFunction
164.
Lecture 6

Area is a function of

  1. ATime
  2. BSpeed
  3. CRadius
  4. DVelocity
165.
Lecture 6

What is the domain of 3x?

  1. A(−∞, −∞)
  2. B(+∞, +∞)
  3. C(−∞, +∞)
  4. D(+∞, −∞)
166.
Lecture 6

The domain of the function h(x) = 1/((x − 2)(x − 4)) is

  1. A(−∞, 2) ∪ (2, 4) ∪ (4, +∞)
  2. B(−∞, 2} ∪ {2, 4} ∪ {4, ∞)
  3. C(−∞, 2.5) ∪ (2.5, 4.5) ∪ (4.5, ∞)
  4. DAll of these are incorrect
167.
Lecture 6

Who was the mathematician credited with first using the term "function"?

  1. AEuler
  2. BLeibniz
  3. CNewton
  4. DLaplace

Leibniz introduced the term "function" in 1673.Leibniz ne 1673 mein "function" ka lafz introduce kiya.

168.
Lecture 6

What determines a function?

  1. AWhen each x value has multiple y values
  2. BWhen each y value has multiple x values
  3. CWhen each x value determines exactly one y value
  4. DWhen each y value determines exactly one x value

A function assigns exactly one output y to each input x.Function har input x ko bilkul ek output y deta hai.

169.
Lecture 6

In the notation y = f(x), what does 'f' represent?

  1. AA number
  2. BA constant
  3. CA variable
  4. DA function
170.
Lecture 6

What's the natural domain of a function?

  1. AThe domain resulting from physical constraints
  2. BThe domain explicitly stated in the function
  3. CThe domain that arises from the function's formula
  4. DThe domain defined by numerical values of x

Example: f(x) = 1/x has natural domain x ≠ 0.Misal: f(x) = 1/x ka natural domain x ≠ 0 hai.

171.
Lecture 6

What's the range of a function?

  1. ASet of all possible x values
  2. BSet of all possible y values
  3. CThe domain of the function
  4. DThe intersection of x and y values

The range is the set of all output values.Range tamam output values ka set hai.

172.
Lecture 6

Which operation combines two functions by assigning one as the value to the independent variable of the other?

  1. AAddition
  2. BSubtraction
  3. CComposition
  4. DDivision

Composition: (f ∘ g)(x) = f(g(x)).Composition: (f ∘ g)(x) = f(g(x)).

173.
Lecture 6

What is the domain of the composition f ∘ g?

  1. AAll x in the domain of g for which g(x) is in the domain of f
  2. BThe intersection of the domains of f and g
  3. CThe union of the domains of f and g
  4. DThe domain of f only

x must be in the domain of g, and g(x) must be in the domain of f.x ka g ke domain mein hona zaroori hai, aur g(x) ka f ke domain mein.

174.
Lecture 6

Which function type assigns the same number to every x in the domain?

  1. APolynomial
  2. BMonomial
  3. CConstant
  4. DExponential

Example: f(x) = 5 for every x.Misal: har x ke liye f(x) = 5.

175.
Lecture 6

What defines a monomial in x?

  1. AA function with one variable
  2. BAny polynomial function
  3. CA function with multiple variables
  4. DAn expression with x raised to a non-negative integer power

A monomial has the form cxⁿ with n = 0, 1, 2, ...Monomial ki form cxⁿ hoti hai jahan n = 0, 1, 2, ...

176.
Lecture 6

What's the notation for the sum of two functions f and g?

  1. A(f - g)(x)
  2. B(f * g)(x)
  3. C(f + g)(x)
  4. D(f / g)(x)
177.
Lecture 6

What is the domain of f/g?

  1. AUnion of the domains of f and g
  2. BIntersection of the domains of f and g, excluding x where g(x) = 0
  3. CIntersection of the domains of f and g
  4. DThe domain of g only

Division by zero is not allowed, so remove the zeros of g.Zero se divide karna allowed nahi, isliye g ke zeros nikal do.

178.
Lecture 6

How does altering the domain of a function occur?

  1. ABy changing the function's notation
  2. BBy substituting variables in the function
  3. CBy restricting the values allowed for the independent variable
  4. DBy changing the order of operations in the function

Restricting the allowed x-values changes (restricts) the domain.Allowed x-values ko limit karne se domain change (restrict) ho jata hai.

179.
Lecture 7

We have f(x) = x², g(x) = x. If we want to add these two functions, which of the following options is correct?

  1. Af(x) + x² = g(x) + x
  2. Bf(x) + x² = g(x) = x
  3. Cf(x) = x² = g(x) + x
  4. Df(x) + g(x) = x² + x
180.
Lecture 7

____ operation has no analog with the arithmetic operations?

  1. AComposition
  2. BAddition
  3. CSubtraction
  4. DMultiplication
181.
Lecture 7

When two functions are composed, one is assigned as a ____ to the independent variable of the other

  1. ANumber
  2. BZero
  3. CValue
  4. DBoth a and c
182.
Lecture 7

Consider two functions f(x) = x³ and g(x) = x + 9, then f∘g(x) =

  1. A(x + 9)³
  2. Bx + 3
  3. Cx + 9
  4. DNone of these
183.
Lecture 7

Consider two functions f(x) = x² and g(x) = √x, then f∘g(x) = ____

  1. Ax²
  2. B√x
  3. Cx
  4. DNone of these

f(g(x)) = (√x)² = x for x ≥ 0.x ≥ 0 ke liye f(g(x)) = (√x)² = x hota hai.

184.
Lecture 7

Consider two functions f(x) = 3√x and g(x) = √x; what is true about these functions?

  1. Af(x)/g(x) = 3x
  2. Bf(g(x)) = 3x
  3. Cf(x)·g(x) = 3x
  4. DNone of these

3√x · √x = 3x.Yahan 3√x · √x = 3x banta hai.

185.
Lecture 7

How is the notation y=f(x) read?

  1. A"y multiplied by f of x"
  2. B"y equals f of x"
  3. C"y function of x"
  4. D"y times f times x"
186.
Lecture 7

Which is an example of a constant function?

  1. Af(x) = x²
  2. Bf(x)=2x+1
  3. Cf(x)=2
  4. Df(x)=x+2

A constant function has no x in its formula.Constant function ke formula mein koi x nahi hota.

187.
Lecture 7

How are arithmetic operations performed on functions?

  1. AThey involve only addition and subtraction
  2. BThey involve addition, subtraction, multiplication, and division
  3. CThey include exponentiation and logarithms
  4. DThey are limited to addition and multiplication

f + g, f − g, f·g and f/g are all defined.f + g, f − g, f·g aur f/g sab defined hain.

188.
Lecture 7

What does f ⋅ g represent?

  1. AThe division of two functions
  2. BThe composition of two functions
  3. CThe multiplication of two functions
  4. DThe addition of two functions

(f·g)(x) = f(x)·g(x).Yahan (f·g)(x) = f(x)·g(x) hota hai.

189.
Lecture 7

What is the domain of f + g?

  1. AUnion of the domains of the individual functions
  2. BIntersection of the domains of the individual functions
  3. CThe natural domain of each function separately
  4. DThe range of the individual functions

f(x) + g(x) needs both f(x) and g(x) to be defined.f(x) + g(x) ke liye f(x) aur g(x) dono ka defined hona zaroori hai.

190.
Lecture 7

What characterizes the decomposition of a function?

  1. ABreaking it down into simpler functions
  2. BCombining it with other functions
  3. CAssigning values to the function's domain
  4. DConverting it into a monomial

Example: h(x) = (x + 1)² can be written as f(g(x)) with g(x) = x + 1, f(x) = x².Misal: h(x) = (x + 1)² ko f(g(x)) likh sakte hain jahan g(x) = x + 1, f(x) = x².

191.
Lecture 7

Which describes a polynomial in x?

  1. AIt has variables with negative exponents
  2. BIt includes only linear equations
  3. CIt has non-negative integer exponents
  4. DIt includes variables with positive exponents

Every power of x in a polynomial is a non-negative integer (0, 1, 2, ...).Polynomial mein x ki har power non-negative integer (0, 1, 2, ...) hoti hai.

192.
Lecture 7

In an equation written as y = f(x), what happens if the roles of x and y are reversed?

  1. AThe equation remains the same
  2. BThe equation becomes undefined
  3. Cx becomes the dependent variable and y the independent variable
  4. Dy becomes the dependent variable and x the independent variable

Reversing roles means x is now found from y, so x becomes dependent and y independent.Roles ulte karne ka matlab hai ke ab x, y se nikalta hai, isliye x dependent aur y independent ban jata hai.

193.
Lecture 7

How is the composition of functions related to the analogy of putting on socks and shoes?

  1. AIt suggests that functions should be solved independently
  2. BIt illustrates the importance of following a specific order in function composition
  3. CIt shows that functions are reversible operations
  4. DIt emphasizes the randomness in function compositions

You put on socks first, then shoes; reversing the order gives a different result, just as f∘g usually differs from g∘f.Pehle jurabein pehnte hain phir joote; order ulta karo to result alag aata hai, bilkul jaise f∘g aam tor par g∘f se alag hota hai.

194.
Lecture 8

If f(x) is multiplied by a positive constant c, then which of the following geometric effects take place?

  1. AThe graph of f(x) is compressed vertically if 0 < c < 1
  2. BThe graph of f(x) is stretched vertically if c > 1
  3. CThis is called vertical scaling by a factor of c
  4. DAll of these
195.
Lecture 8

A graph in the plane is the graph of a function if and only if ____ line intersects the graph more than once.

  1. AVertical
  2. BNo vertical
  3. CPerpendicular
  4. DNon-perpendicular
196.
Lecture 8

Graph of f(x) = |x| is ____

  1. ACircle shape
  2. BV shaped
  3. CU shaped
197.
Lecture 8

y = f(x) + 3: translation of the function is ____ by 3 units

  1. AUp
  2. BDown
  3. CLeft
  4. DRight
198.
Lecture 8

Graph of y = |x − 5| is a ____ of the graph y = |x| 5 units to the right to get the graph of y.

  1. AReading
  2. BTranslation
  3. CCreating
  4. DDefinition
199.
Lecture 8

What is the graph of a function?

  1. AThe solution of one equation
  2. BThe set of points (x, y) in the xy-plane with y = f(x)
  3. CThe set of x-values for a given y-value
  4. DA representation of linear equations only

The graph is all points whose coordinates satisfy y = f(x).Graph un tamam points ka hai jin ke coordinates y = f(x) ko satisfy karte hain.

200.
Lecture 8

What does the graph of f(x) = |x| look like?

  1. AA straight line through (0, 0) and (1, 0)
  2. BA V shape: slope −1 for x < 0 and slope 1 for x ≥ 0
  3. CA curve crossing the y-axis at 1 and 2
  4. DA single straight line through the origin with slope 1

|x| = −x for x < 0 and x for x ≥ 0, giving two half-lines meeting at the origin.x < 0 ke liye |x| = −x aur x ≥ 0 ke liye x, isliye do half-lines origin par milti hain.

201.
Lecture 8

What does a hole (open dot) in the graph of a function usually show?

  1. AThe function is undefined (or has another value) at that single point
  2. BThe function has a vertical asymptote there
  3. CThe function equals zero there
  4. DThe graph meets the y-axis there

A hole means the graph skips one point: f is not defined there, or is defined elsewhere.Hole ka matlab hai graph ek point chhor deta hai: wahan f defined nahi, ya kisi aur jagah defined hai.

202.
Lecture 8

If c > 0, how is the graph of y = f(x) + c related to the graph of y = f(x)?

  1. AShifted up by c units
  2. BShifted down by c units
  3. CCompressed vertically
  4. DStretched vertically

Adding c to every output raises every point by c.Har output mein c add karne se har point c upar chala jata hai.

203.
Lecture 8

The graph of y = f(−x) is the reflection of y = f(x) about the y-axis. What happens to the range?

  1. AIt stays the same
  2. BEvery value in it changes sign
  3. CIt becomes the domain
  4. DIt becomes empty

Reflecting about the y-axis changes only x-coordinates; the y-values (range) are unchanged, while the domain is reflected.y-axis ke about reflect karne se sirf x-coordinates badalte hain; y-values (range) wahi rehti hain, jab ke domain reflect ho jata hai.

204.
Lecture 8

If c > 1, what does multiplying f(x) by c (graph of y = c·f(x)) do to the graph?

  1. AStretches it vertically by a factor of c
  2. BCompresses it vertically by a factor of c
  3. CShifts it along the x-axis
  4. DReflects it about the y-axis

Each y-value is multiplied by c > 1, so the graph is pulled away from the x-axis.Har y-value ko c > 1 se multiply kiya jata hai, isliye graph x-axis se door khinch jata hai.

205.
Lecture 8

Which statement regarding the graph of a function is accurate?

  1. AA function's graph can meet a vertical line at several points
  2. BA function's graph intersects the y-axis at most once
  3. CA function's graph intersects the y-axis at exactly two points
  4. DA function's graph meets every horizontal line at most once

x = 0 gives at most one value f(0), so the graph meets the y-axis at most once.x = 0 se zyada se zyada ek value f(0) milti hai, isliye graph y-axis se zyada se zyada ek baar milta hai.

206.
Lecture 8

What does it mean if some vertical line intersects a graph more than once?

  1. AIt indicates the graph is not a function
  2. BIt signifies a point of discontinuity in the function
  3. CIt means the function has multiple roots
  4. DIt indicates a point of intersection between two functions

One x-value would have two y-values, so the graph is not the graph of a function.Ek x-value ki do y-values hongi, isliye yeh kisi function ka graph nahi hai.

207.
Lecture 8

How is the vertical line test used to decide whether a curve is the graph of a function?

  1. AIf some vertical line meets the curve exactly twice, it is a function
  2. BIf some vertical line misses the curve, it is not a function
  3. CIf some vertical line meets the curve more than once, it is not a function
  4. DIf one particular vertical line meets the curve once, it is a function

A function gives at most one y for each x, so no vertical line may cross its graph twice.Function har x ke liye zyada se zyada ek y deta hai, isliye koi vertical line uske graph ko do baar cross nahi kar sakti.

208.
Lecture 8

How is the graph of y = −f(x) related to the graph of y = f(x)?

  1. AReflection about the x-axis
  2. BReflection about the y-axis
  3. CTranslation to the left
  4. DTranslation to the right

Every y-value changes sign, so the graph flips over the x-axis.Har y-value ka sign badal jata hai, isliye graph x-axis par ulat jata hai.

209.
Lecture 8

A graph passes the horizontal line test. What does this tell you?

  1. AThe function is one-to-one, so it has an inverse
  2. BThe graph has no horizontal asymptotes
  3. CThe graph never meets the x-axis
  4. DThe function is even

No horizontal line meets the graph twice, so no two x-values share a y-value.Koi horizontal line graph se do baar nahi milti, isliye do x-values ki ek hi y-value nahi hoti.

210.
Lecture 9

Traditionally, the calculus that comes out of the tangent problem is called

  1. AMultiplicational calculus
  2. BNon-differential calculus
  3. CDifferential calculus
  4. DAll of these
211.
Lecture 9

Calculus that comes out of the area problem is called

  1. ADifferential calculus
  2. BNon-differential calculus
  3. CIntegral calculus
  4. DMultiplicational calculus
212.
Lecture 9

In geometry, a line is called ____ to a circle if it meets the circle at exactly one point

  1. Acoordinates
  2. Bnegative line
  3. Cpositive line
  4. Dtangent
213.
Lecture 9

Consider a point P on a curve in the xy-plane. Let Q be another point other than P on the curve. Draw a line through P and Q to get what is called the ____ line for the curve. Now move the point Q toward P. The secant line will rotate to a 'limiting' position as Q gets closer and closer to P. The line that will occupy this limiting position will be called the ____ line at P

  1. ATangent, Secant
  2. BSecant, Tangent
  3. CTangent, Tangent
  4. DSecant, Secant
214.
Lecture 9

If we let our rectangles increase in number, then the approximation will be better and the result will be getting a ____ on the number of rectangles.

  1. ALimiting value
  2. BNon-limiting value
  3. CTangent
  4. DCoordinates
215.
Lecture 9

____ are basically a way to study the behavior of the y-values of a function in response to the x-values as they approach some number or go to infinity

  1. ALimits
  2. BTangents
  3. CCircles
  4. DLines
216.
Lecture 9

Consider f(x) = sin(x)/x where x is in

  1. ALimits
  2. BBrackets
  3. CRadians
  4. DAll of these
217.
Lecture 9

Remember that π radians = ?

  1. A150 degrees
  2. B180 degrees
  3. C0 degrees
  4. D90 degrees
218.
Lecture 9

[For f(x) = sin(x)/x] f(x) is not defined at x =

  1. A0
  2. B90
  3. C80
  4. D180
219.
Lecture 9

What field of mathematics was initially motivated by finding areas of plane regions and tangent lines to curves?

  1. ATrigonometry
  2. BCalculus
  3. CGeometry
  4. DAlgebra
220.
Lecture 9

What calculus branch arises from the area problem?

  1. ADifferential Calculus
  2. BIntegral Calculus
  3. CAnalytical Calculus
  4. DGeometric Calculus

Finding areas leads to integral calculus; finding tangent lines leads to differential calculus.Areas nikalne se integral calculus aata hai; tangent lines nikalne se differential calculus.

221.
Lecture 9

How are tangent lines and area calculations related to the concept of limit?

  1. AThey both involve the concept of curvature
  2. BTheir precise definitions depend on the fundamental notion of a limit
  3. CThey are unrelated concepts in calculus
  4. DLimits are not involved in tangent lines or area problems

Both the slope of a tangent line and the area under a curve are defined as limits.Tangent line ka slope aur curve ke neeche area dono limits ke tor par define hote hain.

222.
Lecture 9

How is the tangent line to a general curve at a point P defined?

  1. AA secant line through P turned by a fixed angle
  2. BA line meeting the curve at exactly one point
  3. CA line through the centre of a circle
  4. DThe limiting position of secant lines PQ as Q moves toward P

Take secant lines through P and a nearby point Q; as Q → P they approach the tangent line.P aur qareeb ke point Q se secant lines lo; jab Q → P to yeh tangent line ki taraf jati hain.

223.
Lecture 9

How is a limit used to find the area between a curve and the x-axis?

  1. AApproximate the region by rectangles and let their number increase without bound
  2. BApply trigonometric functions to the curve
  3. CMeasure the curve's length
  4. DApproximate the region by circles

Sum rectangle areas; as rectangles get thinner and more numerous, the sum approaches the exact area.Rectangles ke areas jama karo; jab rectangles patle aur zyada hote hain to sum exact area ki taraf jata hai.

224.
Lecture 9

What happens to the accuracy of the area calculation as the number of rectangles used for approximation increases?

  1. AThe accuracy decreases
  2. BThe area calculation becomes less reliable
  3. CThe approximation gets better, approaching a limiting value
  4. DThe approximation remains the same

More, thinner rectangles fit the region better, so the sums approach the exact area.Zyada aur patle rectangles region mein behtar fit hote hain, isliye sums exact area ki taraf jate hain.

225.
Lecture 9

What does the limit represent in the context of a function?

  1. AThe highest value of the function
  2. BThe lowest value of the function
  3. CThe behavior of the function's y-values as x-values approach a number or infinity
  4. DThe number where the function is defined

A limit describes what y-values approach as x approaches a number or ±∞.Limit batati hai ke jab x kisi number ya ±∞ ki taraf jaye to y-values kis taraf jati hain.

226.
Lecture 9

What does the notation lim_(x→0) sin x represent?

  1. AThe limit of sin x as x approaches 0
  2. Bsin x evaluated at 0
  3. CThe derivative of sin x at 0
  4. DThe integral of sin x from 0 to x

'lim' with x→0 underneath means the value sin x approaches as x gets close to 0.'lim' ke neeche x→0 ka matlab hai woh value jis ki taraf sin x jata hai jab x 0 ke qareeb ho.

227.
Lecture 9

What is the significance of the right-hand limit for a function?

  1. AIt represents the limit from negative infinity
  2. BIt signifies the limit as x approaches from the right of a specific value
  3. CIt represents the limit from positive infinity
  4. DIt's the limit of the function at zero

lim_(x→a⁺) f(x) uses only x-values greater than a.lim_(x→a⁺) f(x) mein sirf a se bari x-values use hoti hain.

228.
Lecture 9

When does the two-sided limit lim_(x→a) f(x) exist?

  1. AWhen the left-hand and right-hand limits are different
  2. BWhenever f(a) is defined
  3. CWhen the left-hand and right-hand limits both exist and are equal
  4. DWhen f has a local maximum at a

The two-sided limit exists exactly when both one-sided limits exist and agree.Two-sided limit sirf tab exist karti hai jab dono one-sided limits exist karein aur barabar hon.

229.
Lecture 9

In which situation does lim_(x→a) f(x) fail to exist?

  1. Af has a local minimum at a
  2. Bf oscillates between two values infinitely often as x → a
  3. Cf has a horizontal asymptote
  4. Df is a polynomial

Example: sin(1/x) keeps swinging between −1 and 1 near 0, so it approaches no single value.Misal: 0 ke qareeb sin(1/x) −1 aur 1 ke beech jhoolta rehta hai, isliye kisi ek value ki taraf nahi jata.

230.
Lecture 9

If f(x) grows without bound as x → a, what can be said about lim_(x→a) f(x)?

  1. AIt is a finite number
  2. BIt exists only toward +∞
  3. CIt does not exist as a finite number
  4. DIt always equals −∞

An unbounded function cannot approach a single real number (we may write +∞ or −∞ to describe how it fails).Unbounded function kisi ek real number ki taraf nahi ja sakta (yeh batane ke liye ke kaise fail hota hai hum +∞ ya −∞ likh sakte hain).

231.
Lecture 9

Why can a table of values sometimes give a wrong guess for a limit?

  1. AThe function may oscillate, and the chosen x-values may hide this
  2. BThe function converges
  3. CThe function is continuous
  4. DThe function is differentiable

Example: sin(π/x) is 0 at x = 1, 1/2, 1/3, ..., but it has no limit at 0.Misal: sin(π/x) x = 1, 1/2, 1/3, ... par 0 hai, lekin 0 par iski koi limit nahi.

232.
Lecture 10

lim (x→2) of (x + 3) is:

  1. A2
  2. B3
  3. C5
  4. D6
233.
Lecture 10

For any polynomial P(x) = c₀ + c₁x + + cₙxⁿ and any real number a, lim_{x→a} P(x) = c₀ + c₁a + + cₙaⁿ =

  1. AP(a)
  2. BP(a + 1)
  3. CP(a − 1)
  4. D1/P(a)
234.
Lecture 10

lim_{x→a} f(x) where f(x) = k (k is a constant) is equal to

  1. Ak + 2
  2. Bk + 1
  3. Ck
  4. Dkf
235.
Lecture 10

If lim_(x→a) f(x) = L and n is a positive integer, what is lim_(x→a) [f(x)]ⁿ?

  1. ALⁿ
  2. BnL
  3. CL
  4. Dn + L

The limit of a product is the product of limits, so n equal factors give Lⁿ.Product ki limit limits ka product hoti hai, isliye n barabar factors se Lⁿ milta hai.

236.
Lecture 10

For a polynomial p(x), what is lim_(x→a) p(x)?

  1. Ap(a)
  2. B0
  3. CIt does not exist
  4. DThe leading coefficient of p

Polynomial limits are found by direct substitution.Polynomial ki limit direct substitution se nikalti hai.

237.
Lecture 10

What is lim_(x→0⁺) 1/x?

  1. A+∞
  2. B−∞
  3. C0
  4. D1

For small positive x, 1/x is a large positive number that grows without bound.Chhote positive x ke liye 1/x bara positive number hai jo bina had ke barhta rehta hai.

238.
Lecture 10

If n is an odd positive integer, what is lim_(x→−∞) xⁿ?

  1. A−∞
  2. B+∞
  3. C0
  4. D1

An odd power of a large negative number is a large negative number.Bare negative number ki odd power bhi bara negative number hoti hai.

239.
Lecture 10

How are limits handled when evaluating rational functions involving +∞ or −∞?

  1. ABy dividing numerator and denominator by the highest power of x in the denominator
  2. BBy subtracting the highest power of x from the expression
  3. CBy substituting x = 0
  4. DBy adding the highest power of x to the expression

After dividing, terms like 1/x and 1/x² go to 0, leaving a simple limit.Divide karne ke baad 1/x aur 1/x² jaise terms 0 ho jate hain, aur simple limit bach jati hai.

240.
Lecture 10

If the numerator of a quotient tends to a nonzero number while the denominator tends to 0, what is true about the limit?

  1. AIt equals 0
  2. BIt equals the numerator's limit
  3. CIt is not a finite number (it is +∞, −∞, or does not exist)
  4. DIt always equals 1

Dividing a nonzero number by smaller and smaller values makes the size grow without bound.Nonzero number ko chhoti se chhoti values se divide karo to size bina had ke barhta hai.

241.
Lecture 10

What is lim_(x→2) (x−2)(x−4)/(x−2)?

  1. A2
  2. B4
  3. C−2
  4. D−4

Cancel (x−2) to get x−4, then substitute x = 2: 2−4 = −2.(x−2) cancel karo to x−4 milta hai, phir x = 2 rakho: 2−4 = −2.

242.
Lecture 10

As x → +∞ or −∞, the limit of a rational function equals the limit of:

  1. AThe ratio of the highest-power terms of the numerator and denominator
  2. BThe ratio of the constant terms
  3. CThe sum of all coefficients
  4. DThe highest power of x alone

For large |x| the leading terms dominate, e.g. (3x²+1)/(x²−5) behaves like 3x²/x² = 3.Bare |x| par leading terms hi asar rakhte hain, maslan (3x²+1)/(x²−5) bilkul 3x²/x² = 3 jaisa behave karta hai.

243.
Lecture 10

If both numerator and denominator of a rational function tend to 0 as x → a, what should you conclude?

  1. AThe limit does not exist
  2. BThe limit is 0
  3. CThe limit is 1
  4. DNothing yet: simplify first (e.g. cancel the common factor x − a)

0/0 is indeterminate; the limit can be any value or fail to exist.0/0 indeterminate hai; limit koi bhi value ho sakti hai ya exist hi na kare.

244.
Lecture 11

If lim_{x→a} f(x) = L, then the inequality L − ε < f(x) < L + ε holds in any subset of the interval

  1. A(a − δ, a) ∪ (a, a + δ)
  2. B(a − 1, a) ∪ (a, a + 1)
  3. C(a − ε, a) ∪ (a, a + ε)
  4. DNone of these
245.
Lecture 11

Usually the number that signifies the idea of f(x) being as close to limit L as we want it to be must be a/an ____

  1. AInteger
  2. BNatural number
  3. CSmall positive number
  4. DSmall negative number

ε is any small positive number.ε koi bhi chhota positive number hota hai.

246.
Lecture 11

ε (epsilon) used in the definition of limit can be a negative number.

  1. ATrue
  2. BFalse
247.
Lecture 11

If for any positive number ε (epsilon) we can find δ (delta) such that |(3x − 5) − 1| < ε if x satisfies 0 < |x − 2| < δ, then f(x) = ____

  1. A3x − 5 − 1
  2. Bx − 2
  3. C3x − 5
  4. DNone of these
248.
Lecture 11

In the ε–δ definition of lim_(x→a) f(x) = L, what does ε measure?

  1. AHow close f(x) must be to L
  2. BThe domain of f
  3. CThe behaviour of f at infinity
  4. DHow close x must be to a

ε is the allowed distance between f(x) and L; δ is the distance between x and a.ε f(x) aur L ke darmiyan allowed distance hai; δ x aur a ke darmiyan distance hai.

249.
Lecture 11

Which statement is the ε–δ definition of lim_(x→a) f(x) = L?

  1. AFor every ε > 0 there is δ > 0 such that 0 < |x − a| < δ implies |f(x) − L| < ε
  2. BFor every δ > 0 there is ε > 0 such that |f(x) − L| < ε implies |x − a| < δ
  3. CThere is one ε > 0 such that |f(x) − L| < ε for all x
  4. D|f(x) − L| < ε for every x in the domain

Any closeness ε for f(x) must be achievable by taking x close enough (within δ) to a.f(x) ke liye koi bhi closeness ε, x ko a ke kaafi qareeb (δ ke andar) le kar hasil honi chahiye.

250.
Lecture 12

A function is said to be a continuous function if the function is continuous on the interval

  1. A(−∞, +∞)
  2. B(0, +∞)
  3. C(−∞, 0)
  4. DNone of these
251.
Lecture 12

For a function f(x) to be continuous on interval (a, b) the function must be continuous

  1. AAt all points in (a, b)
  2. BOnly at a and b
  3. CAt the midpoint of a and b
  4. DNone of these
252.
Lecture 12

Polynomials are always ____ functions

  1. AContinuous
  2. BDiscontinuous
  3. CBoth
  4. DNone
253.
Lecture 12

A function f is said to be continuous on a closed interval [a, b] if f is continuous from the right at a and f is continuous from the left at b and f is continuous on

  1. A(a, b]
  2. B[a, b)
  3. C[a, b]
  4. D(a, b)
254.
Lecture 12

If f is continuous on [a, b], and if f(a) and f(b) have opposite signs, then there is ____ one solution of the equation f(x) = 0 in the interval (a, b).

  1. Aat most
  2. Bexactly
  3. Cat least
  4. Dnot more than
255.
Lecture 12

If the functions f and g are continuous at c, then f + g is ____

  1. ADiscontinuous
  2. BContinuous
256.
Lecture 12

If f is continuous on a closed interval [a, b] and C is any number between f(a) and f(b), inclusive, then there is at least one number x in the interval [a, b] such that ______

  1. Af(x) is not equal to C
  2. Bf(x) = C
  3. Cf(x) > C
  4. Df(x) < C
257.
Lecture 12

How is continuity defined concerning a function's graph?

  1. AThe smoothness of the curve
  2. BThe absence of breaks or gaps in the graph
  3. CThe existence of real numbers in the domain
  4. DThe convergence of the function to a single value

A continuous graph can be drawn without lifting the pencil.Continuous graph pencil uthaye baghair banaya ja sakta hai.

258.
Lecture 12

A function f is discontinuous at x = c if which of the following happens?

  1. Af(c) is undefined
  2. Blim_(x→c) f(x) does not exist
  3. Clim_(x→c) f(x) and f(c) have different values
  4. DAny of the above

Continuity needs all three: f(c) defined, limit exists, and they are equal; failing any one gives a discontinuity.Continuity ke liye teeno zaroori hain: f(c) defined ho, limit exist kare, aur dono barabar hon; koi ek bhi fail ho to discontinuity hai.

259.
Lecture 12

When is a function f continuous on a closed interval [a, b]?

  1. AIt is continuous on (a, b), continuous from the right at a, and from the left at b
  2. BIt is continuous only at a and b
  3. CIt is continuous at a single point inside (a, b)
  4. DIt is differentiable at a and b

At the endpoints only one-sided continuity is required.Endpoints par sirf one-sided continuity zaroori hai.

260.
Lecture 12

What does the Intermediate Value Theorem state?

  1. AIf f is continuous on [a, b] and k is between f(a) and f(b), then f(c) = k for some c in [a, b]
  2. BEvery function takes every value on every interval
  3. CIf f(a) = f(b), then f is constant on [a, b]
  4. DEvery function is continuous on a closed interval

A continuous graph cannot jump over any value between f(a) and f(b).Continuous graph f(a) aur f(b) ke beech kisi value ko jump nahi kar sakta.

261.
Lecture 13

lim_{x→0} sin x / x =

  1. A1
  2. B2
  3. C0
  4. D1/2

Standard limit: sin x / x → 1 as x → 0.Standard limit: jab x → 0 to sin x / x → 1.

262.
Lecture 13

cot(x) is discontinuous at ____

  1. Acos(x) = 0
  2. Bsin(x) = 0
  3. Ctan(x) = 0
  4. Dcot(x) = 0
263.
Lecture 13

Which condition is equivalent to f being continuous at x = c?

  1. Alim_(h→0) f(c + h) = f(c)
  2. Blim_(h→0) f(h) = c
  3. Cf(c) = 0
  4. Dlim_(h→0) f(c + h) = 0

Putting x = c + h, x → c is the same as h → 0, so lim f(x) = f(c) becomes this.x = c + h rakhne se x → c aur h → 0 ek hi baat hai, isliye lim f(x) = f(c) yeh ban jata hai.

264.
Lecture 13

What is the significance of the Squeeze Theorem in finding limits?

  1. AIt uses graphical approximations
  2. BIt traps a function between two simpler functions with the same limit
  3. CIt uses trigonometric identities
  4. DIt finds local extrema

If g ≤ f ≤ h near a and g, h have the same limit L, then f also has limit L.Agar a ke qareeb g ≤ f ≤ h ho aur g, h ki limit same L ho, to f ki limit bhi L hai.

265.
Lecture 13

What is lim_(x→0) (sin x)/x?

  1. A0
  2. B1
  3. CUndefined
  4. D∞

cos x ≤ (sin x)/x ≤ 1 near 0, and both sides go to 1.0 ke qareeb cos x ≤ (sin x)/x ≤ 1 hai, aur dono sides 1 ki taraf jati hain.

266.
Lecture 13

How is the continuity of tan x, cot x, sec x and csc x established?

  1. AThey are quotients of the continuous functions sin x and cos x, so they are continuous wherever the denominator is not 0
  2. BBy the Squeeze Theorem
  3. CThey are polynomials
  4. DThey are continuous everywhere

A quotient of continuous functions is continuous where its denominator is nonzero.Continuous functions ka quotient wahan continuous hai jahan denominator nonzero ho.

267.
Lecture 13

Which inequality (for x near 0, x ≠ 0) is used with the Squeeze Theorem to show lim_(x→0) (sin x)/x = 1?

  1. Acos x ≤ (sin x)/x ≤ 1
  2. B0 ≤ (sin x)/x ≤ x
  3. C−1 ≤ (sin x)/x ≤ 0
  4. Dx ≤ (sin x)/x ≤ 2x

Both cos x and 1 tend to 1 as x → 0, so the middle term does too.Jab x → 0 to cos x aur 1 dono 1 ki taraf jate hain, isliye beech wala term bhi.

268.
Lecture 13

What are lim_(x→+∞) sin x and lim_(x→+∞) cos x?

  1. ABoth are 0
  2. BBoth are 1
  3. CBoth are +∞
  4. DNeither limit exists

sin x and cos x keep oscillating between −1 and 1, never settling to one value.sin x aur cos x −1 aur 1 ke beech oscillate karte rehte hain, kabhi ek value par nahi rukte.

269.
Lecture 13

What defines the behavior of sine and cosine functions as x approaches ±∞?

  1. AOscillation between 1 and −1
  2. BConvergence to 0
  3. CDivergence to infinity
  4. DUnpredictable oscillation

They keep oscillating between −1 and 1 forever.Yeh hamesha −1 aur 1 ke beech oscillate karte rehte hain.

270.
Lecture 14

Average velocity of a body, V_ave =

  1. A(d₁ − d₀)/(t₁ − t₀)
  2. B(t₁ − t₀)/(f(t₀) − f(t₁))
  3. Clim_{t₁→t₀} (f(t₀) − f(t₁))/(t₁ − t₀)
  4. DNone of these
271.
Lecture 14

On a straight line, the tangent at any point coincides with the line ____

  1. Anowhere
  2. Beverywhere
  3. Csomewhere
  4. Dnone of these

The tangent to a straight line is the line itself.Straight line ki tangent khud wohi line hoti hai.

272.
Lecture 14

What mathematical transformation turns a Secant line into a Tangent line?

  1. ATranslation
  2. BRotation
  3. CLimiting
  4. DInterpolation

Letting the second point approach the first, the secant line's limiting position is the tangent line.Doosre point ko pehle ke qareeb le jao to secant line ki limiting position tangent line hoti hai.

273.
Lecture 14

What is the formula for Average Velocity?

  1. ADistance traveled ÷ time elapsed
  2. BTime elapsed ÷ distance traveled
  3. CDistance traveled × time elapsed
  4. D1 ÷ time elapsed

Average velocity = change in position divided by change in time.Average velocity = position ki change divided by time ki change.

274.
Lecture 14

What mainly distinguishes instantaneous velocity from average velocity?

  1. AThe length of the time interval (a single instant versus an interval)
  2. BThe distance covered
  3. CThe direction of motion
  4. DInstantaneous velocity cannot be computed

Average velocity is over an interval; instantaneous velocity is the limit as the interval shrinks to 0.Average velocity ek interval par hoti hai; instantaneous velocity woh limit hai jab interval 0 tak chhota ho jaye.

275.
Lecture 14

Instantaneous velocity at time t₀ is the limit, as h → 0, of which quantity?

  1. AThe average velocity over [t₀, t₀ + h]
  2. BThe area under the position curve
  3. CThe position at t₀
  4. DThe total distance traveled

Shrinking the interval makes the average velocity approach the instantaneous velocity.Interval chhota karne se average velocity instantaneous velocity ki taraf jati hai.

276.
Lecture 14

On a position-versus-time graph, what does the slope of the tangent line at a point represent?

  1. AAverage velocity
  2. BInstantaneous velocity
  3. CTotal distance
  4. DElapsed time

Tangent slope = instantaneous rate of change of position = instantaneous velocity.Tangent slope = position ka instantaneous rate of change = instantaneous velocity.

277.
Lecture 14

How is the average velocity over [t₀, t₁] found from the position function s = f(t)?

  1. ASlope of the secant line between t₀ and t₁
  2. BSlope of the tangent line at t₀
  3. CArea under the graph of f
  4. DValue f(t₁)

[f(t₁) − f(t₀)] ÷ (t₁ − t₀) is the secant slope.[f(t₁) − f(t₀)] ÷ (t₁ − t₀) secant slope hai.

278.
Lecture 14

What represents the average rate of change of y = f(x) over the interval [x₀, x₁]?

  1. ASlope of the tangent line at x₀
  2. BSlope of the secant line between x₀ and x₁
  3. CSlope of the tangent line at x₁
  4. DValue f(x₁)

Average rate = [f(x₁) − f(x₀)] ÷ (x₁ − x₀), the secant slope.Average rate = [f(x₁) − f(x₀)] ÷ (x₁ − x₀), yani secant slope.

279.
Lecture 14

What represents the instantaneous rate of change of y = f(x) at x = x₀?

  1. ASlope of the secant line between x₀ and x₁
  2. BSlope of the tangent line at x₀
  3. CValue f(x₀)
  4. DArea under the curve up to x₀

It is the limit of secant slopes, which is the tangent slope at x₀.Yeh secant slopes ki limit hai, jo x₀ par tangent slope hai.

280.
Lecture 14

What is the slope of the secant line of y = f(x) between x₀ and x₁?

  1. A[f(x₁) − f(x₀)] / (x₁ − x₀)
  2. Bf(x₁) − f(x₀)
  3. Cf(x₀) / x₀
  4. D(x₁ − x₀) / [f(x₁) − f(x₀)]

Slope = rise ÷ run = change in y over change in x.Slope = rise ÷ run, yani y ki change divided by x ki change.

281.
Lecture 14

What does the slope of the Secant line represent?

  1. AAverage rate of change
  2. BInstantaneous rate of change
  3. CAverage velocity
  4. DInstantaneous velocity

The secant slope is the change in y divided by the change in x.Secant slope y ki change divided by x ki change hai.

282.
Lecture 14

What mathematical concept defines the rate of change of one quantity with respect to another?

  1. AIntegral calculus
  2. BVector calculus
  3. CCoordinate geometry
  4. DDifferential calculus

Differential calculus studies derivatives, i.e. rates of change.Differential calculus derivatives yani rates of change ko study karta hai.

283.
Lecture 15

A function f is a differentiable function if it is differentiable on the interval

  1. A(−∞, ∞)
  2. B(a, ∞) where a is any negative integer
  3. C(0, ∞)
  4. DNone of these
284.
Lecture 15

The formula lim_{h→0} (f(x + h) − f(x))/h is called ____ with respect to x of the function f

  1. ADerivative
  2. BSlope
  3. CTangent
  4. DNone of these
285.
Lecture 15

If a function is differentiable at a point then it is continuous at that point. The converse is

  1. AFalse
  2. BTrue

Continuity does not give differentiability, e.g. |x| at x = 0.Continuous hone se differentiable hona zaroori nahi, maslan |x| at x = 0.

286.
Lecture 15

If a function is differentiable then the function is also ____ at that point

  1. ADiscontinuous
  2. BNot exist
  3. CContinuous
287.
Lecture 16

d/dx [d·h(x)] = ____, where d is a constant

  1. Ad·h(x)
  2. Bd·h′(x)
  3. C0
  4. DNone of these
288.
Lecture 17

The derivative of sin x is:

  1. Acos x
  2. B−cos x
  3. Csin x
  4. Dtan x
289.
Lecture 18

The chain rule is used for two functions f and g, if we have ________ of these functions

  1. AProduct
  2. BSum
  3. CComposition
  4. DNone of these
290.
Lecture 18

Find the derivative of tan(5 − 3x) w.r.t. x

  1. A−3sec²(5 − 3x)
  2. B3sec²(5 − 3x)
  3. C3cos(5 − 3x)
  4. D3cos²(5 − 3x)

Chain rule: sec²(5 − 3x) · (−3).Chain rule lagao: sec²(5 − 3x) · (−3).

291.
Lecture 19

Derivative of the [7y⁴ + x³y + x = 4] will be solved by ____ method

  1. AImplicit
  2. BExplicit
  3. CSimple
292.

30° = ____

  1. Aπ/3
  2. Bπ/4
  3. Cπ/6
  4. Dπ/2
293.

If f is a twice differentiable function at a stationary point x₀ and f″(x₀) < 0, then f has relative ____ at x₀

  1. AMinima
  2. BMaxima
  3. CNone of these
  4. DBoth a and b

f″(x₀) < 0 means concave down, so a relative maximum.f″(x₀) < 0 ka matlab concave down hai, isliye wahan relative maximum hai.