Ranking scale also include the properties of which scale?
- ANominal scale
- BInterval scale
- CRatio scale
- DAll of these
The ordinal (ranking) scale has the naming property of the nominal scale plus order.
Syllabus: lectures 1–21. Past-paper MCQs are shown first.Syllabus: lecture 1–21. Past paper ki MCQs pehle dikhai gayi hain.
142 MCQs · 30 short · 9 long questions · 142 MCQs from past papers142 MCQs · 30 short · 9 long sawal · 142 MCQs past papers se
Ranking scale also include the properties of which scale?
The ordinal (ranking) scale has the naming property of the nominal scale plus order.
Statistics deals with
Statistics studies aggregates (groups) of facts, not single items.
When data is labeled to identify an attribute of element, the measurement scale is:
Labels that only identify categories form a nominal scale.
Which one of the following sampling methods would give unbiased results, if you need to find out the number of people in your town liking vanilla or chocolate ice creams?
Only option b uses random selection; neighbours, friends and classmates are convenience samples.
Data in the Population Census Report is:
Published census reports used by others are secondary data.
Data used by an agency which is originally collected by them is:
Data collected by the user itself is primary data.
………use the division of a circle into different sectors.
Sector (pie) graphs divide a circle into sectors proportional to the values.
…………..graphs are similar to bar graphs.
Column graphs are bar graphs with vertical bars.
A bar graph uses ……to show data.
A bar graph shows values by the lengths of bars.
For some data you are given Maximum value = 96, Minimum Value = 23, Range = 73, number of classes selected between 5 and 15. Then class width will be
h ≈ 73/k with k from 5 to 15 gives widths from about 4.9 to 14.6, so 5, 8 and 15 are all possible.
The beginnings of a cumulative frequency distribution are presented below. What is the next number in the Cumulative Frequency column? Classes / Frequency / Cumulative Frequency: 6.1 to 8: 1, 1; 8.1 to 10: 2, ?; 10.1 to 12: 3
Next cumulative frequency = 1 + 2 = 3.
How to find the class midpoint?
Class mark = (lower limit + upper limit)/2.
As a general rule, statisticians tends to use which of the following number of classes when arranging the data
A frequency distribution normally uses between 5 and 20 classes.
If ‘2’ is a leading digit in 24335, then what are the trailing digits in the observation to display a ‘Stem-and-Leaf display’.
With stem 2 (the leading digit) the remaining digits 4335 are the trailing digits.
Stem and leaf was introduced by:
The stem-and-leaf display was introduced by John Tukey.
Sum of three terms whose mean is equal to 90 is
Σx = n·x̄ = 3 × 90 = 270.
The algebraic sum of deviations from mean is:
Σ(x − x̄) = 0 is a basic property of the arithmetic mean.
If the median of an arrangement of numbers is equal to the mean of its middle terms then the arrangement contains
The median is the mean of the two middle terms only when n is even.
The value that has half of the observations above it and half the observations below it is known as:
The median divides ordered data into two equal halves.
Which one of the following is less than median for a symmetrical distribution:
Median = P50 = Q2 = D5; D4 = P40 is below it, P51 above it.
The value of the middle term in a ranked (ordered) data set is called the
The middle value of ordered data is the median.
Which one of the following is greater than median for a symmetrical distribution:
Median = D5 = P50; only D7 (= P70) is above it.
Which one of the following measurements does not divide a set of observations into equal parts?
Quantiles divide data into equal parts; standard deviation measures spread.
If mean of the two observations is 10.5, then median of these two observations will be:
For two observations the median is their average, which equals the mean.
In a set of 10 values all the values are 5, what is the value of 5th Decile:
All values are 5, so every quantile including D5 is 5.
Median can be found only when:
The median is the middle value of data arranged in order.
If median = 7 and Mean = 5, what is the value of Q2:
The second quartile is the median, so Q2 = 7.
The average which is defined as the reciprocal of the arithmetic mean of the reciprocals of the values is called
H.M = n/Σ(1/x), the reciprocal of the mean of reciprocals.
If a car is running at the rate of 15 km/hr during the first 30 km and at 20 km/hr during the second 30 km, which type of average will be used to find the average speed per hour?
For equal distances at different speeds the harmonic mean gives the average speed.
For the given data 2, 3, 7, 0, -8 G.M will be:
One value is zero, so the product and hence the geometric mean is zero.
If any value in the data is zero, then it is not possible to have:
The reciprocal of zero is undefined, so the harmonic mean cannot be computed.
In a set of 20 values all the values are 2, what is the value of Geometric Mean:
If all values equal 2, every mean including the G.M is 2.
If a car is running at the rate of 15 km/hr during the first 30 km and at 20 km/hr during the second 30 km, which type of average will be used to find the average speed per hour:
Equal distances at different speeds require the harmonic mean.
Range of the values -2,-3,-4,-3,-9,-2,-8,-1,0 is
Range = largest − smallest = 0 − (−9) = 9.
Range of the values -2.50,-3.70,-4.80,-3.10,-9.70,-2.20,-8.90,-1.60, 0.60 is
Range = 0.60 − (−9.70) = 10.30.
Range of the values -10, -19, -9, -15, -28, -26, -25 is:
Range = −9 − (−28) = 19.
What is the range of -2, -3, -5, -10:
Range = largest − smallest = −2 − (−10) = 8.
The approximate number of observations in a set of data covered by the interval Median ± Q.D is:
Median ± Q.D covers about the middle 50% of the observations.
What does it mean when a data set has a standard deviation equal to zero:
S.D = 0 only when every value equals the mean, i.e. all values are the same.
If the standard deviation of a population is 9, the population variance is
σ² = 9² = 81.
If the standard deviation of a population is 5.5, the population variance is:
σ² = 5.5² = 30.25.
What is the Standard Deviation of 7, 7, 7, 7, 7, 7, 7
All values are equal, so there is no spread and S.D = 0.
The dispersion which is calculated from all observed values is:
Standard deviation uses every observation.
The descriptive measure of dispersion that is based on the concept of a deviation about the mean is:
Standard deviation is built from deviations about the mean.
Positive square root of variance of a distribution is:
S.D = +√variance.
Standard deviation is affected by the change of________:
S.D is unchanged by adding a constant but is multiplied by a scale factor.
A five number summary consists of:
The five-number summary is minimum, Q1, median, Q3 and maximum.
According to the empirical rule approximately 95% of the measurements will fall under which interval?
The empirical rule puts about 95% of values within two standard deviations of the mean.
For moderately skewed distributions, the approximate percentage of cases included between x̄ − 2S and x̄ + 2S is:
By the empirical rule about 95% of values lie within x̄ ± 2S.
If the both tails of the distribution are equal, then distribution is called:
Equal tails on both sides mean a symmetrical distribution.
For given data, discuss the shape of the distribution: X: 0.2, 1.2, 2.2, 3.2; f: 8, 15, 23, 40
Frequencies rise toward the largest X, so the long tail is on the left: negatively skewed.
When more values are lying at the start of the distribution, it is:
Values bunched at the low end leave a long right tail: positively skewed.
First moment about origin is always equal to:
The first moment about the origin m1' = Σx/n is the mean.
For a positively skewed distribution m3 will be:
The third moment about the mean is positive for positive skewness.
The distribution is mesokurtic if the moment coefficient of kurtosis b2 is:
b2 = 3 defines a mesokurtic (normal-like) curve.
If the third moment about mean is zero (m3 = 0), then the distribution is:
m3 = 0 indicates a symmetrical distribution.
If the regression line: Y = 3 + 5X meets y-axis at ‘8’ units distance from origin then the value of x-intercept is
Setting Y = 0 in Y = 3 + 5X gives X = −3/5.
In scatter diagram, clustering of points around a straight line indicates
Points clustered about a straight line show a linear relationship.
If the equation of regression line is y = 5, then what result will you take out from it?
y = 5 has slope 0, a horizontal line parallel to the x-axis.
If the estimating equation is Y = a – bX, which of the following is true
The slope −b is negative, meaning Y decreases as X increases (inverse relationship).
In regression line Y=a+bX, X is called:
X is the independent (explanatory) variable used to predict Y.
If all the values fall on the same straight line and the line has a positive slope then what will be the value of the correlation coefficient 'r':
Perfect positive linear relationship gives r = +1.
In a regression line Y = a + bX, the value of the correlation coefficient will be zero if:
r and b have the same sign and b = 0 exactly when r = 0.
In the model Y = mX + a, Y is also known as the:
Y is the variable predicted from X, i.e. the dependent variable.
Which one is equal to explained variation divided by total variation?
r² = explained variation / total variation is the coefficient of determination.
If a = 4, b = 2 in the estimated line y = a + bx and the independent variable has value 3, the value of the dependent variable is
y = 4 + 2(3) = 10.
If we plot paired observations (x, y), i = 1 … n, on a graph it is called,
Plotting paired (x, y) points gives a scatter diagram.
What we consider in simple correlation analysis:
Simple correlation measures the strength of linear association between two variables.
In the regression line Y = a + bX + e the variable which is non-random is:
In the regression model X is fixed (non-random) and Y is random.
The variable plotted on the horizontal or X-axis in a scatter diagram is called the:
The independent variable is plotted on the X-axis.
The coefficient of correlation lies between:
r always lies between −1 and +1.
In scatter diagram the variable plotted along Y-axis is:
The dependent variable is plotted on the Y-axis.
5C5 =
5C5 = 5!/(5!·0!) = 1.
The number of ways in which 4 books can be arranged
4 books can be arranged in 4! = 24 ways.
What is the difference between a permutation and a combination:
Order matters in a permutation but not in a combination.
5C5 equals:
5C5 = 5!/(5! 0!) = 1.
When a coin is tossed we get only
A coin has two outcomes, head or tail.
A coin is tossed 3 times then, the number of sample points in the sample space is:
Three tosses give 2³ = 8 sample points.
How many elements are in the sample space of rolling one die:
One die has 6 faces.
For two mutually exclusive events A and B, P(A) = 0.2 and P(B) = 0.4, then P(AUB) is:
P(A∪B) = P(A) + P(B) = 0.2 + 0.4 = 0.6.
If A and B are mutually exclusive events then P(A or B) equals:
For mutually exclusive events P(A and B) = 0, so P(A or B) = P(A) + P(B).
If P(A∩B) = 0.12, P(A) = 0.3, find P(B) where ‘A’ and ‘B’ are independent:
P(B) = P(A∩B)/P(A) = 0.12/0.3 = 0.4.
We use the General Rule of Multiplication to combine:
P(A∩B) = P(A)P(B|A) is the general rule for dependent events.
In a multiplication theorem P(A n B) equals:
General multiplication rule: P(A∩B) = P(A)·P(B|A).
If A and B are independent events with P(A) = 0.05 and P(B) = 0.65, then P(A|B) = :
For independent events P(A|B) = P(A) = 0.05.
In the multiplication theorem, P(A ∩ B) equals:
The general multiplication rule is P(A ∩ B) = P(A)P(B|A).
A standard deck of 52 cards is shuffled. What is the probability of choosing the 5 of diamonds:
There is exactly one 5 of diamonds, so P = 1/52.
The best measure of variation is
Variance (and its root, the S.D) uses all observations and is the most widely used measure of variation.
The degree to which numerical data tend to spread about an average is called
Spread of data about an average is called dispersion.
A data in which we study about Regions is called ……
Data classified by region or place is geographical data.
Frequency polygon is …………
A frequency polygon joins plotted points with straight lines, so it is a line graph.
Geographical data deals with…
Geographical classification is by region or place.
A histogram is consists of a set of adjacent rectangles whose bases are marked off by:
Histogram bars are drawn between class boundaries so adjacent bars touch.
What is/are the mode for the following data: 1, m, d, n, 2, d, 2, d, s, 5, 5, 7
d occurs 3 times while 2 and 5 occur twice each, so the mode is d.
What we commonly called a bell shaped distribution:
A bell-shaped curve is symmetrical about its centre.
Sum of absolute deviations of the values is least when deviations are taken from
Σ|x − A| is minimum when A is the median.
Data classified by attributes are called:
Attributes are non-numerical characteristics, giving qualitative data.
A frequency polygon is obtained by plotting the class frequencies against what?
A frequency polygon plots frequencies against class midpoints.
Data classified by attributes are called:
Attributes give qualitative data.
If we roll a die then probability of getting a ‘2’ will be
One favourable face out of 6: 1/6.
Symbolically, a marginal probability is:
A marginal (unconditional) probability of a single event is P(A).
The probability of drawing a ‘white’ ball from a bag containing 4 red, 8 black and 3 white balls is:
Total balls = 4 + 8 + 3 = 15, white = 3: P = 3/15.
Which of the statements is true regarding a sample?
A sample is a part of the population.
Which one of the following graphs is used for a time series data?
A historigram plots values against time, so it is used for time series.
Which of the following comes first to make frequency distribution
The range is found first, then the number of classes and class interval.
The probability of drawing a 'jack card' from 52 playing cards is:
There are 4 jacks in 52 cards.
If a curve has a longer tail to the right, it is called:
A longer right tail means positive skewness.
Which one of the following is not included in measures of central tendency?
Quartile deviation is a measure of dispersion.
Which of the following is not based on all the observations?
The mode depends only on the most frequent value.
If a player well shuffles the pack of 52 playing cards, then the probability of a black card from 52 playing cards is:
There are 26 black cards in 52.
Which dispersion is used to compare variation of two series?
The coefficient of variation is unit-free, so it compares variation of different series.
When two coins are tossed the probability of at least one head is:
Of HH, HT, TH, TT, three have at least one head: 3/4.
Which one of the following is written at the top of the table?
The title is written at the top of a table.
Which one of the following is the class frequency?
Class frequency is the number of observations falling in a class.
If X is a discrete random variable, then the function f(x) is
For a discrete random variable f(x) = P(X = x) is the probability function; F(x) is the distribution function.
In the given series 1, 2, 1, 1, 2, 2, 2, 3, 4, 5, 3, 2, 3, 1, 4, 2, 3 the mode is
The value 2 occurs 6 times, more than any other value.
True for the population,
A population is the whole collection of individuals, objects or measurements of interest.
Data arrangement in ascending or descending order
Data arranged in order of magnitude is called an array.
What is the main objective of Descriptive statistics?
Descriptive statistics organises, summarises and describes the collected data.
Which measure of central tendency?
A measure of central tendency is an average of the distribution.
Which one is not a measure of dispersion?
The 50th percentile is the median, a measure of location.
In a positively skewed curve which relation holds?
In a positively skewed distribution mean > median > mode.
When mean is 25 and S.D is 5 then CV is
C.V = (5/25) × 100 = 20%.
Which branch of statistics deals with the techniques that are used to organize, summarize, and present the data:
Organising, summarising and presenting data is descriptive statistics.
In a sample of 800 students in a university, 160, or 20%, are Business majors. Based on the above information, the school's paper reported that "20% of all the students at the university are Business majors." This report is an example of:
A conclusion about all students drawn from a sample is a statistical inference.
Which of the following is the class frequency
Class frequency is the number of observations in a class.
How to construct the class interval:
The class interval is the difference between consecutive lower class limits.
The sum of squares of deviations from mean is:
Σ(x − a)² is least when a = x̄.
Statistic is a numerical quantity, which is calculated from:
A statistic is computed from a sample.
If Mean = 25 & S.D is 5 then C.V is
C.V = (5/25) × 100 = 20%.
Which of the following measures of dispersion is least affected by extreme values of observations in a data:
Q.D uses only the middle 50% of data, so extremes do not affect it.
In statistics, we deal with:
Statistics deals with aggregates of facts, not single items.
For any number k ……….1, at least 1 – 1/k² of the data-values fall within k standard deviations of the mean:
Chebyshev's theorem is stated for any k greater than 1.
Which level of measurement is required for the median:
The median needs data that can be ordered, so at least ordinal.
From the following observations 2, 3, 4, 5, 4, 6, 4, the mode is:
4 occurs three times, more than any other value.
When two coins are tossed the probability of at most one head is:
HT, TH and TT have at most one head: 3/4.
When more values are lying at the start of the distribution, it is a:
Values bunched at the start leave a long right tail, i.e. positive skewness.
What is 'fm' in the formula of mode:
fm is the frequency of the modal class, the maximum frequency.
When referring to a curve whose longer tail is to the left, you would call it:
A longer left tail means the curve is skewed to the left (negatively).
For positively skewed distribution Mean…….Median…….Mode:
In a positively skewed distribution mean > median > mode.
For a positively skewed distribution:
Positive skew pulls the mean above the median, which is above the mode.
Which of the following is not the type of frequency curves?
A frequency polygon is a graph made of straight lines, not a type of frequency curve.
No MCQs match this filter.Is filter mein koi MCQ nahi.
What does it mean when standard deviation = 0?
A standard deviation of 0 means there is no variation: every observation equals the mean, i.e. all values in the data set are the same.
If two coins are tossed, what is the probability of getting no head?
S = {HH, HT, TH, TT} has 4 equally likely outcomes; only TT has no head, so P(no head) = 1/4.
Define sample space.
The sample space S is the set of all possible outcomes of a random experiment; for example, tossing a coin gives S = {H, T}.
Find geometric mean of the given values 20, 22, 25.
G = (20 × 22 × 25)^(1/3) = (11000)^(1/3). log G = (1.3010 + 1.3424 + 1.3979)/3 = 4.0414/3 = 1.3471, so G = antilog 1.3471 ≈ 22.24.
Define G.M. with formula.
The geometric mean of n positive values is the nth root of their product: G = (x1 · x2 · … · xn)^(1/n); equivalently G = antilog(Σ log x / n), and for grouped data G = antilog(Σ f log x / n).
Which type of data does Chebychev's theorem apply to?
Chebychev's theorem applies to any data set (any distribution shape, not only bell-shaped data): at least 1 − 1/k² of the values lie within k standard deviations of the mean, k > 1.
What is correlation?
Correlation is the degree of linear association between two variables, i.e. how closely they move together; it is measured by the correlation coefficient r, which lies between −1 and +1.
Relative and absolute frequency of distribution.
The absolute frequency of a class is the number of observations in it. The relative frequency is that number divided by the total number of observations (f/Σf), often expressed as a percentage; relative frequencies sum to 1.
What is grouping error and which technique is used to overcome this problem?
Grouping error arises in grouped data because all values in a class are assumed to be at the class midpoint, so measures computed from the frequency table differ from those of the raw data. For moments it is reduced by Sheppard's corrections (e.g. corrected m2 = m2 − h²/12).
Name the types of dispersion.
Measures of dispersion are of two types: absolute measures (range, quartile deviation, mean deviation, variance and standard deviation) and relative measures (coefficient of range, coefficient of quartile deviation, coefficient of mean deviation, coefficient of variation).
For the given data Mean = 3.8, Median = 2.3 and Standard Deviation = 1.3, find Pearson's coefficient of skewness. (Two worked versions are given: 3.8 − 2.3/1.3 = 1.154 and 3(3.8 − 2.3)/1.3 = 3.46; which is true?)
Pearson's coefficient of skewness = 3(mean − median)/S.D = 3(3.8 − 2.3)/1.3 = 4.5/1.3 = 3.46. So 3.46 is correct; 1.154 is wrong because it drops the factor 3. The value is positive, so the distribution is positively skewed.
"If P(A|B) = P(B|A) then P(A) = P(B)". Indicate whether the statement is true or false. Also give reason.
True whenever P(A ∩ B) > 0: P(A|B) = P(A ∩ B)/P(B) and P(B|A) = P(A ∩ B)/P(A); equal numerators force P(A) = P(B). If A and B are mutually exclusive, both conditional probabilities are 0 and P(A), P(B) can differ.
Why do we use coefficient of variation?
C.V = (S/x̄) × 100 is a relative, unit-free measure of dispersion. It is used to compare the variability (consistency) of two or more data sets measured in different units or having very different means; the set with smaller C.V is more consistent.
What is coefficient of correlation?
Pearson's coefficient of correlation r is a numerical measure of the strength and direction of the linear relationship between two variables X and Y: r = Cov(X, Y)/(SX SY); it lies between −1 and +1.
For the given data Mean = 3.8, Median = 2.3 and Standard Deviation = 1.3, find Pearson's coefficient of skewness.
Sk = 3(mean − median)/S.D = 3(3.8 − 2.3)/1.3 = 4.5/1.3 = 3.46; positively skewed.
How are the moment ratios b1 and b2 helpful in determining the shape of a distribution?
b1 = m3²/m2³ measures skewness: b1 = 0 for a symmetric distribution and larger values show greater skewness (the sign of m3 gives the direction). b2 = m4/m2² measures kurtosis: b2 = 3 mesokurtic, b2 > 3 leptokurtic, b2 < 3 platykurtic.
What are the basic properties of a random experiment?
(1) It can be repeated any number of times under the same conditions. (2) It has two or more possible outcomes, all known in advance. (3) The outcome of any one trial cannot be predicted with certainty.
Write down the principle of least squares method.
The line of best fit is the one for which the sum of squares of the vertical deviations of the observed values from the line is minimum: Σ(Y − Ŷ)² = Σ(Y − a − bX)² is minimised.
What is the main drawback of grouping process in construction of a frequency table?
In grouping, the identity of the individual observations is lost; only class frequencies are known, so values computed from grouped data are approximations.
Which two suits of playing cards are of red colour?
Hearts and diamonds.
Write the use of Venn diagram in set theory.
A Venn diagram represents sets and subsets pictorially (the universal set as a rectangle and sets as circles) and is used to show and verify relationships and operations such as union, intersection, complement and difference.
Can we apply Bayes theorem in the situation where the partition of sample space S is created by more than two sets?
Yes. Bayes theorem holds for any partition A1, A2, ..., Ak of S: P(Ai|B) = P(Ai)P(B|Ai)/Σ P(Aj)P(B|Aj).
In an experiment on the stiffness of a spring, the length of the spring under different loads was measured and the regression lines (X on Y and Y on X) were fitted, giving bxy = 0.67 and byx = 0.38. Calculate the correlation coefficient.
r = √(bxy × byx) = √(0.67 × 0.38) = √0.2546 = 0.505 (positive, since both coefficients are positive).
Write the two normal equations of the regression line of X on Y.
For X = c + dY: ΣX = nc + dΣY and ΣXY = cΣY + dΣY².
Define five number summary.
The five-number summary is X0 (smallest value), Q1, median, Q3 and Xm (largest value); it gives a good idea of the shape of the distribution.
Define rule of combination.
A combination is a selection of r objects from n distinct objects without regard to order. The number of combinations is nCr = n!/[r!(n − r)!].
Write all possible subsets of S = {x, y, z}.
There are 2³ = 8 subsets: ∅, {x}, {y}, {z}, {x, y}, {x, z}, {y, z}, {x, y, z}.
In the linear regression line Y = a + bX, what does the constant b represent?
b is the slope of the line (regression coefficient of Y on X): the average change in Y for a unit increase in X.
Find mode from 70, 80, 50, 70, 80, 80, 100.
80 occurs three times (70 twice, others once), so mode = 80.
Find the H.M from the data 10, 20, 30.
H.M = n/Σ(1/x) = 3/(1/10 + 1/20 + 1/30) = 3/(11/60) = 180/11 = 16.36.
Write the sample space of three coins and find the probability of at least 1 tail and of no head.
S = {HHH, HHT, HTH, THH, HTT, THT, TTH, TTT}, 8 equally likely outcomes. At least one tail: every outcome except HHH, so P = 7/8. No head: only TTT, so P = 1/8.
The numbers of airplane accidents in a year are 1, 2, 3, 4 with corresponding probabilities 1/6, 2/6, 2/6 and 1/6. What is the variance of annual accidents?
E(X) = (1 + 4 + 6 + 4)/6 = 15/6 = 2.5. E(X²) = (1 + 8 + 18 + 16)/6 = 43/6. Var(X) = E(X²) − [E(X)]² = 43/6 − 6.25 = 11/12 = 0.917.
A husband and wife appear in an interview for two vacancies in the same post. The probability of husband's selection is 2/7 and probability of wife's selection is 3/5. What is the probability that (a) both of them will be selected (b) only one of them is selected (c) none of them is selected?
Selections are independent: P(H) = 2/7, P(W) = 3/5. (a) P(both) = (2/7)(3/5) = 6/35 = 0.171. (b) P(only one) = (2/7)(2/5) + (5/7)(3/5) = 4/35 + 15/35 = 19/35 = 0.543. (c) P(none) = (5/7)(2/5) = 10/35 = 2/7 = 0.286.
Compute the mean deviation from mean for the following data (where mean = 18.6). X: 14.5, 16.5, 18.5, 20.5, 22.5; Frequency: 3, 5, 11, 7, 3.
n = 29. |X − 18.6| = 4.1, 2.1, 0.1, 1.9, 3.9; f|X − 18.6| = 12.3, 10.5, 1.1, 13.3, 11.7, total 48.9. M.D = 48.9/29 = 1.69.
Assume that X is a number chosen at random from the set of integers between 1 and 14 both inclusive. What is the probability that (i) X is an even number (ii) X is a multiple of 5 or 6?
(i) Even numbers 2, 4, ..., 14: 7 of 14, P = 1/2. (ii) Multiples of 5 or 6: 5, 10, 6, 12 (none common), P = 4/14 = 2/7.
Find the first two moments about mean from the following data: X = 34, 70, 42, 54, 40, 68, 56, 38, 36, 72.
x̄ = 510/10 = 51. m1 = Σ(x − x̄)/n = 0. Deviations: −17, 19, −9, 3, −11, 17, 5, −13, −15, 21; squares sum to 2010. m2 = 2010/10 = 201.
For the data values 0.75, 0.89, 0.79, 0.88, 0.99, 0.65, 0.91, 0.59, 0.75, calculate Pearson's coefficient of skewness using the mode of the data.
x̄ = 7.2/9 = 0.80; mode = 0.75; Σx² = 5.8944; S² = 5.8944/9 − 0.64 = 0.01493; S = 0.1222. Sk = (mean − mode)/S = (0.80 − 0.75)/0.1222 = 0.41 (positively skewed).
Two fair dice are tossed. What is the conditional probability that the sum of the two dice will be 7 given that the sum is greater than 6?
Let A: sum = 7 and B: sum > 6. n(B) = 6 + 5 + 4 + 3 + 2 + 1 = 21 (sums 7 to 12); A ∩ B = A has 6 points. P(A|B) = P(A ∩ B)/P(B) = (6/36)/(21/36) = 6/21 = 2/7.
Chebychev's inequality: find the k = 2 and k = 3 limits and state the fraction of data that lies between them.
By Chebyshev, at least 1 − 1/k² of the data lie within x̄ ± kS. For k = 2: at least 1 − 1/4 = 3/4 (75%) lie in x̄ ± 2S. For k = 3: at least 1 − 1/9 = 8/9 (88.9%) lie in x̄ ± 3S.